# $Id: conexant-1.0,v 1.2 2006/01/11 17:27:16 faxguy Exp $

#
# Configuration for a Rockwell/Conexant K56 Class 1.0 modem using
# the RCV56DPF and similar chipsets.  These chipsets are generally
# flash- upgradable and appear on ISA as well as PCI.  They
# support "Class 1.0" which means that they have "adaptive receive"
# (AT+FAR=1), but not V.34.
#
#    Comtrol RocketModem II/III
#    MultiTech MT5600ZDX
#    Zoltrix FMVSP56i3
#
# CONFIG:CLASS1.0:56000:.*:.*: Manufacturer=Rockwell/Conexant Model=AC/K56
# CONFIG:CLASS1.0:MT5600ZDX:.*:.*: Manufacturer=MultiTech Model=MT5600ZDX
# CONFIG:CLASS1.0:.*:*LEONARDO*:.*: Manufacturer=Digicom Model=Leonardo
#
# BEGIN-SERVER
# END-SERVER
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class1.0	# use this to supply a hint
ModemRate:		19200		# rate for DCE-DTE communication
ModemFlowControl:	rtscts		# default
#
ModemNoFlowCmd:		AT&K0		# setup no flow control
ModemHardFlowCmd:	AT&K3		# setup hardware flow control
ModemSoftFlowCmd:	AT&K4		# setup software flow control
ModemSetupDTRCmd:	AT&D2		# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
#
Class1AdaptRecvCmd:	AT+FAR=1	# reports carrier detection mismatches