# $Id: lucent-mt-10,v 1.4 2006/06/06 20:45:14 faxguy Exp $ # # prototype config for MultiTech 5634-series modems using # the Lucent/Agere chipset supporting V.34-Fax. # # CONFIG:CLASS1.0:LT V.90 1.0 MT5634ZPX-PCI*:.*:.*: Manufacturer=MultiTech Model=MT5634ZPX-PCI # CONFIG:CLASS1.0:LT V.92 1.0 MT5634ZPX-PCI*:.*:.*: Manufacturer=MultiTech Model=MT5634ZPX-PCI-V92 # CONFIG:CLASS1.0:LT V.90 1.0 MT5634ZBA*:.*:.*: Manufacturer=MultiTech Model=MT5634ZBA # CONFIG:CLASS1.0:LT V.92 1.0 MT5634ZBA*:.*:.*: Manufacturer=MultiTech Model=MT5634ZBA # CONFIG:CLASS1.0:LT V.90 1.0 ISI5634PCI*:.*:.*: Manufacturer=MultiTech Model=ISI5634PCI # CONFIG:CLASS1.0:LT V.92 1.0 ISI5634PCI*:.*:.*: Manufacturer=MultiTech Model=ISI5634PCI # CONFIG:CLASS1.0:LT V.92 1.0 MT5634SMI*:.*:.*: Manufacturer=MultiTech Model=MT5634SMI # CONFIG:CLASS1.0:Mainpine Venus V.92*:.*:.*: Manufacturer=Mainpine Model=RockForce # # BEGIN-SERVER # END-SERVER ModemType: Class1.0 # use this to supply a hint ModemRate: 57600 # must be at least as fast as the DCE-DCE communication ModemFlowControl: rtscts # many firmwares have broken software flow control ModemSetupDTRCmd: AT&D3 # hang up and reset on DTR drop Class1EnableV34Cmd: AT+F34=14,1,2 # 33600-2400 primary, 2400-1200 control Class1TMConnectDelay: 400 # counteract quick CONNECT response # # Older firmwares on MainPine cards may require this: # Class1Cmd: AT+FCLASS=1 # # If your line supports Caller-ID, you may want to uncomment this... # ModemResetCmds: AT+VCID=1 # CallIDPattern: "NMBR=" # CallIDPattern: "NAME=" # Or with the MT5634ZBA-DID you'll probably need something like... # ModemReadyCmds: AT*DS1*DD0*DF1*DN4 # enable DTMF-DID, wink-start, 4 digits # CallIDPattern: "DTMF" # format of AT*DF1 # CallIDAnswerLength: 4 # four DTMF-DID digits then ATA # ModemResetCmds: AT*DP1 # to reverse the polarity