# umc92144.config
# Steffan Klipsch 03 Oct 98 
#
# This file will enable the faxaddmodem script to automatically detect
# UMC modems with BIOS versions as used in the Creatix 14400 modems SG144U, 
# SG144Ui, Phonemaster 144VF and Phonemaster 144VFi.
#
# Credits go to Sascha Ottolski how posted a working snippet in Mar 98.
#
# Instructions : install as file $SPOOL/config/umc92144

#
# Configuration for modems based on UMC 92114 DATA/FAX/VOICE CHIP SET 
# tested on CREATIX Phonemaster 144 VFi
# with BIOS CIS CCUSBIXX V1.10 10/10/95/VERSION 1.10 01-05-01-01)
# users of BIOS VERSION 1.00 00-04-00-00 should consider a BIOS update
# (search on http://www.creatix.com)
#
# CONFIG: CLASS2: *CCUSBIXX*-*
# BEGIN-SERVER
# END-SERVER
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2        # use this to setup defaults
ModemRate:              19200         # rate for DCE-DTE communication
ModemFlowControl:       rtscts
ModemSetupDTRCmd:       AT&D2	      # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1	      # setup so DCD reflects carrier (or not)
ModemSetupAACmd:        AT+FAA=1
ModemSetVolumeCmd:      "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
ModemDialCmd:           ATDT%s       # T for tone dialing
ModemNoFlowCmd:         AT&K	      
ModemHardFlowCmd:       AT&K3	      
ModemSoftFlowCmd:       AT&K4	      
ModemAnswerFaxBeginCmd: "<19200>"     # fax mode works better with 19200 baud
ModemWaitForConnect:    yes
ModemRecvFillOrder:     MSB2LSB       
Class2RecvDataTrigger:  "\022"