# HylaFAX prototype configuration file for UMC 9624,2,E,290E 14.4 modem
# - painfully worked out through trial-and-error and HylaFAX bug fixing by
# Lee Howard <faxguy@deanox.com>
#
# Note that this modem will not respond nicely to ATH when already on hook.
# Consequently, HylaFAX versions up to and including 4.1beta3 will not
# play nicely with it.  ATH should be removed from reset commands in the 
# next release.
#
# CONFIG: CLASS2: *-"9624,2,E,290E"-*
#
# BEGIN-SERVER
# END-SERVER
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2        # use this to setup defaults
ModemRate:              19200         # max rate for DCE-DTE communication
ModemFlowControl:       rtscts
ModemSetupDTRCmd:       AT&D2	      # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1	      # setup so DCD reflects carrier (or not)
ModemNoFlowCmd:         AT&K	      
ModemHardFlowCmd:       AT&K3	      
ModemSoftFlowCmd:       AT&K4	      
ModemAnswerFaxBeginCmd: "<19200>"     # fax mode works better with 19200 baud
ModemRecvFillOrder:     MSB2LSB       

Class2APQueryCmd:	none		# prevent ERROR
Class2BUGCmd:		none		# prevent ERROR
Class2CQQueryCmd:	!(0),(0)	# no CQ checking capability
Class2DDISCmd:		AT+FDIS		# workaround broken +FDIS handling
Class2PHCTOCmd:		none		# prevent ERROR
Class2RecvDataTrigger:  "\022"
Class2SPLCmd:		none		# prevent ERROR
Class2TBCCmd:		none		# prevent ERROR