# A configuration file for setupcon

# Change to "yes" and setupcon will explain what is being doing
VERBOSE_OUTPUT=no

# Setup these consoles.  Most people do not need to change this.
ACTIVE_CONSOLES="/dev/tty[1-7]"

# Put here your encoding.  Valid charmaps are: UTF-8 ARMSCII-8 CP1251
# CP1255 CP1256 GEORGIAN-ACADEMY GEORGIAN-PS IBM1133 ISIRI-3342
# ISO-8859-1 ISO-8859-2 ISO-8859-3 ISO-8859-4 ISO-8859-5 ISO-8859-6
# ISO-8859-7 ISO-8859-8 ISO-8859-9 ISO-8859-10 ISO-8859-11 ISO-8859-13
# ISO-8859-14 ISO-8859-15 ISO-8859-16 KOI8-R KOI8-U TIS-620 VISCII
CHARMAP="UTF-8"

# The codeset determines which symbols are supported by the font.
# Valid codesets are: Arabic Armenian CyrAsia CyrKoi CyrSlav Ethiopian
# Georgian Greek Hebrew Lao Lat15 Lat2 Lat38 Lat7 Thai Uni1 Uni2 Uni3
# Vietnamese.  Read README.fonts for explanation.
CODESET="Lat15"

# Valid font faces are: VGA (sizes 8, 14 and 16), Terminus (sizes
# 12x6, 14, 16, 20x10, 24x12, 28x14 and 32x16), TerminusBold (sizes
# 14, 16, 20x10, 24x12, 28x14 and 32x16), TerminusBoldVGA (sizes 14
# and 16), Fixed (sizes 13, 14, 15, 16 and 18), Goha (sizes 12, 14 and
# 16), GohaClassic (sizes 12, 14 and 16).
FONTFACE="TerminusBold"
FONTSIZE="16"

# You can also directly specify nonstandard font and ACM to load:
# FONT=/usr/local/share/funnyfonts/sarge16.psf
# ACM=/usr/local/share/consoletrans/my_special_encoding.acm

# The following variables describe your keyboard and can have the same
# values as the XkbModel, XkbLayout, XkbVariant and XkbOptions options
# in /etc/X11/xorg.conf.
XKBMODEL="pc105"
XKBLAYOUT="de"
XKBVARIANT="nodeadkeys"
XKBOPTIONS="lv3:ralt_switch"

# screen blanking timeout.  monitor remains on, but the screen is cleared to
# range: 0-60 min (0==never)  kernels I've looked at default to 10 minutes.
# (see linux/drivers/char/console.c)
BLANK_TIME="30"

# blanking method (VESA DPMS mode to use after BLANK_TIME, before powerdown):
# on: the default, no DPMS signalling. near instant powerup, no power saving
# vsync: DPMS Standby mode. nearly instant recovery, uses 110/120W (17" screen)
# hsync: DPMS Suspend mode. typically 3s recovery, uses 15/120W (17" screen)
# powerdown,off: DPMS Off mode, typ. 10s recovery, uses  5/120W (17" screen)

# Those values are for my 17" Mag, but some monitors do suspend the same as
# standby.  xset dpms force {off|standby|suspend|on} is useful for this, if X
# supports DPMS on your video card.  Set X's DPMS screensaver with xset dpms
# or use option power_saver in XF86Config
#
# DPMS set by default to on, because hsync can cause problems on certain
# hardware, such as Armada E500 laptops
BLANK_DPMS="off"

# Powerdown time.  The console will go to DPMS Off mode POWERDOWN_TIME
# minutes _after_ blanking.  (POWERDOWN_TIME + BLANK_TIME after the last input)
POWERDOWN_TIME="30"

# rate and delay can get only specific values, consult kbdrate(1) for help
#KEYBOARD_RATE="30"
#KEYBOARD_DELAY="250"

# Turn on numlock by default
#LEDS=+num


# Do not update the following md5 sum if you change
# /etc/console-setup/boottime.kmap.gz and Debconf will not overwrite
# your custom keymap.  Do not update it even if you want to make
# Debconf overwrite it.  Instead simply specify the empty string as
# a md5 sum.

BOOTTIME_KMAP_MD5="9e05b7d79ba510ef2b1e30542fde288a"