#----------------------------------------------------------------------------- # /etc/config.d/base - eisfair boot configuration parameters # # Creation: 31.12.2001 fm # Last Update: $Id$ # # Copyright (c) 2001-2005 Frank Meyer # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. #----------------------------------------------------------------------------- #------------------------------------------------------------------------------ # General settings: #------------------------------------------------------------------------------ HOSTNAME='eis' # name of eisfair server #------------------------------------------------------------------------------ # Ethernet card drivers: # # Name Kernel Bus Description # 3c501 2.4 ISA 3COM EtherLink (3c501) # 3c503 2.2+2.4 ISA 3COM EtherLinkII (3c503) # 3c505 2.2+2.4 ISA 3COM Etherlink Plus (3c505) # 3c507 2.2+2.4 ISA 3COM Etherlink 16 (3c507) # 3c509 2.2+2.4 ISA 3COM EtherLinkIII (3c509) # 3c515 2.2+2.4 ISA 3COM EtherLink XL ISA (3c515) # 3c59x 2.2+2.4 PCI 3COM Vortex/Boomerang 3c59x,3c900,3c905 # 82596 2.2+2.4 Apricot Xen-II on board Ethernet # ac3200 2.4 EISA Ansel Communications EISA 3200 # acenic 2.4 PCI Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit # amd8111e 2.4 PCI AMD 8111 (new PCI lance) # arcnet 2.4 Generic ARCnet # arlan 2.4 PCI Aironet Arlan 655 & IC2200 DS # at1700 2.2+2.4 ISA AT1700 (Fujitsu 86965) ISA # atp 2.4 PAR AT-LAN-TEC/RealTek pocket adapter # b44 2.4 PCI Broadcom 4400 ethernet support # cs89x0 2.2+2.4 ISA IBM Etherjet, cs89x0 based Cards # (Option io=0xnnn necessary!) # de4x5 2.2+2.4 PCI/EISA Digital DE425, DE434, DE435, DE450, DE500 # depca 2.2 ISA DEPCA, DE10x, DE200, DE201, DE202, DE422 # dgrs 2.2 PCI Digi International RightSwitch PCI/EISA # defxx 2.4 PCI Digital DEFEA and DEFPA adapter (FDDI) # depca 2.4 PCI DEPCA, DE10x, DE200, DE201, DE202, DE422 # dgrs 2.4 PCI Digi Intl. RightSwitch SE-X # dl2k 2.4 PCI D-Link 2000-based Gigabit Ethernet # dmfe 2.2+2.4 PCI DM9102 compatible PCI cards from Davicom # e2100 2.2 ISA Cabletron E21xx ISA # elp486 2.2 ISA Intel Professional Workstation/panther 82596 # e100 2.4 PCI EtherExpress Pro/100 # e1000 2.4 PCI Intel(R) PRO/1000 Gigabit Ethernet # e2100 2.4 PCI Cabletron E21xx # eepro 2.2+2.4 ISA Intel EtherExpress Pro/10 # eepro100 2.2+2.4 PCI Intel EtherExpressPro PCI 10+/100B/100+ # eexpress 2.2+2.4 ISA EtherExpress16 ISA # epic100 2.2+2.4 PCI SMC EPIC/100 (EtherPower II) PCI # eth16i 2.2+2.4 ISA/EISA ICL EtherTeam 16i/32 # ewrk3 2.2+2.4 ISA EtherWORKS 3 ISA (DE203, DE204, DE205) # fealnx 2.2+2.4 PCI ASOUND LAN 8139 card - not RTL8139! # forcedeth 2.4 PCI nForce Ethernet # hp 2.2+2.4 ISA HP PCLAN (27245, 27xxx) ISA # hp-plus 2.2+2.4 ISA HP PCLAN+ (27247B and 27252A) ISA # hamachi 2.4 PCI Packet Engines Hamachi GNIC-II # hp100 2.2+2.4 ISA/EISA/PCI HP 10/100VG PCLAN (ISA, EISA, PCI) # intel-gige 2.4 PCI Intel Gigabit Ethernet adapters # lance 2.2+2.4 ISA AMD LANCE and PCnet (AT1500, NE2100) ISA # lp486e 2.4 PCI LP486E on board Ethernet # myson803 2.4 PCI Myson MTD-8xx PCI Ethernet # natsemi 2.2+2.4 PCI Nat Semi # ne 2.2+2.4 ISA NE2000 ISA clone (eg. Realtek 8019, # Accton 16xx, NatSemi 8390, UMC 9003/9008) # ne2k-pci 2.2+2.4 PCI NE2000 PCI (eg. Realtek 8029, Winbond 89c940) # ni5010 2.4 PCI NI5010 # ni52 2.4 PCI NI5210 # ni65 2.4 PCI NI6510 # ns83820 2.4 PCI National Semiconductor DP83820, also # SMC 9452TX, SMC SMC9462TX, # D-Link DGE-500T, PureData PDP8023Z-TG, # SOHO-GA2000T, SOHO-GA2500T, NetGear GA621 # ns820 2.4 PCI Donald Becker's version of DP83820 driver # pcnet32 2.2+2.4 PCI AMD PCI PCnet32 # r8169 2.4 PCI Realtek 8169 Gigabit Ethernet # rtl8139-orig 2.2 PCI RealTek 8129/8139 (not 8019/8029!) # 8139too 2.2+2.4 PCI RealTek 8139 10/100 # 8139cp 2.4 PCI RealTek 8139C+ 10/100 # rtl8139 2.2+2.4 PCI D. Becker's version of RealTek 8139 driver # sb1000 2.4 ISA General Instruments Surfboard 1000 # sis900 2.2+2.4 PCI SiS 900/7016 # sk98lin 2.4 PCI Marvell Yukon, SysKonnect SK-98xx # and SK-95xx Gigabit # skfp 2.4 PCI SysKonnect FDDI PCI # smc-ultra 2.2+2.4 ISA SMC Ultra # smc-ultra32 2.2 EISA SMC Ultra32 # smc9194 2.4 PCI SMC 9194 # starfire 2.2+2.4 PCI Starfire # sundance 2.2+2.4 PCI DFE-550FX or DFE-530TXS # sungem 2.4 PCI Sun GEM: GigabitEthernet/P 2.0 # sunhme 2.4 PCI Sun Happy Meal 10/100baseT # tg3 2.4 PCI Broadcom Tigon3 Gigabit Ethernet # tlan 2.2+2.4 PCI TI ThunderLAN (Compaq Netelligent ...) # tulip 2.2+2.4 PCI DECchip Tulip (dc21x4x) PCI # old_tulip 2.2 PCI Old DECchip Tulip (dc21x4x) PCI # typhoon 2.4 PCI 3CR990 series 'Typhoon' # via-rhine 2.2+2.4 PCI VIA Rhine PCI (3043, VT86c100A, dfe-530tx) # rhinefet 2.4 PCI Yet another Rhine driver # wd 2.2+2.4 ISA SMC WD80*3 # winbond-840 2.2+2.4 PCI Winbond 840 # yellowfin 2.4 PCI Yellowfin Gigabit-NIC / Symbios 53c885 # pcnet_cs 2.2 PCMCIA NS8390-based cards (NE2000, DLINK etc) # 3c574_cs 2.2 PCMCIA 3Com 574 # 3c575_cb 2.2 PCMCIA 3Com 575 # 3c589_cs 2.2 PCMCIA 3Com 589 # airo 2.2 PCMCIA Airo 4500 & 4800 series cards # airo_cs 2.2 PCMCIA Airo 4500 & 4800 series cards # eepro100_cb 2.2 PCMCIA EtherExpress Pro 100 # epic_cb 2.2 PCMCIA SMC 83c170 EPIC/100 # ibmtr_cs 2.2 PCMCIA IBM Token Ring # netwave_cs 2.2 PCMCIA Netwave AirSurfer Wireless LAN # nmclan_cs 2.2 PCMCIA New Media Ethernet LAN # ray_cs 2.2 PCMCIA Raylink wireless cards # smc91c92_cs 2.2 PCMCIA SMC91c92-based cards # tulip_cb 2.2 PCMCIA DEC 21040-family cards # wavelan_cs 2.2 PCMCIA WaveLAN # wavelan2_cs 2.2 PCMCIA WaveLAN2 # wvlan_cs 2.2 PCMCIA Lucent WaveLAN/IEEE 802.11 # xirc2ps_cs 2.2 PCMCIA Xircom: CE2, CEM28, CEM33, or CE3 # wl24_cs 2.2 PCMCIA ELSA Airlancer MC-2 # cs89x0_cs 2.2 PCMCIA IBM EtherJet Ethernet Adapter # orinoco_cs 2.2 PCMCIA Orinoco Based WLAN Cards # axnet_cs 2.2 PCMCIA Asix AX88190 Fast Ethernet # realtek_cb 2.2 PCMCIA Realtek 8139 Based PCMCIA Cards # (D-Link DFE-690TXD) # xircce_cs 2.2 PCMCIA Xircom CreditCard Ethernet CE-10 #------------------------------------------------------------------------------ ETH_DRV_N='1' # number of ethernet drivers to load, usually 1 ETH_DRV_1='pcnet32' ETH_DRV_1_OPTION='' # additional option, e.g. 'io=0x340' for ne #------------------------------------------------------------------------------ # Ether networks used with IP protocol: #------------------------------------------------------------------------------ IP_ETH_N='1' # number of ip ethernet networks, usually 1 IP_ETH_1_NAME='' # optional: other device name than ethX IP_ETH_1_IPADDR='192.168.6.254' # IP address of your n'th ethernet card IP_ETH_1_NETWORK='192.168.6.0' # network of your LAN IP_ETH_1_NETMASK='255.255.255.0' # netmask of your LAN #------------------------------------------------------------------------------ # Additional routes #------------------------------------------------------------------------------ IP_DEFAULT_GATEWAY='192.168.6.1' # your default gateway, e.g. fli4l router IP_ROUTE_N='0' # number of additional routes IP_ROUTE_1='192.168.7.0 255.255.255.0 192.168.6.99' # network netmask gateway #------------------------------------------------------------------------------ # Domain & DNS server #------------------------------------------------------------------------------ DOMAIN_NAME='lan.home' # your domain name DNS_SERVER='192.168.6.1' # your dns server, e.g. fli4l router #------------------------------------------------------------------------------ # Time zone #------------------------------------------------------------------------------ TIME_ZONE='CET' # time zone, use 'CET' or 'GMT' #------------------------------------------------------------------------------ # Optional PCMCIA support: #------------------------------------------------------------------------------ OPT_PCMCIA='no' # pcmcia cards used: yes or no PCMCIA_PCIC='i82365' # pcmcia socket driver: 'i82365' or 'tcic' PCMCIA_PCIC_OPTS='' # option for socket driver, usually empty PCMCIA_CORE_OPTS='' # option for pcmcia core driver, usually empty PCMCIA_CARDMGR_OPTS='' # option for pcmcia card manager, usually empty #------------------------------------------------------------------------------ # optional package: syslogd #------------------------------------------------------------------------------ START_SYSLOGD='yes' # start syslogd & klogd: yes or no SYSLOGD_DEST_N='1' # number of destinations SYSLOGD_DEST_1='*.* /var/log/messages' # prio & destination of syslog msgs SYSLOGD_DEST_1_LOGROTATE='/etc/init.d/syslogd restart' # cmd to run after logr SYSLOGD_DEST_2='*.* /dev/console' # example: log to console SYSLOGD_DEST_2_LOGROTATE='' # cmd to run after logr SYSLOGD_DEST_3='*.* @192.168.6.2' # example: loghost 192.168.6.2 SYSLOGD_DEST_3_LOGROTATE='' # cmd to run after logr SYSLOGD_DEST_4='kern.info /var/log/infos' # example: log infos SYSLOGD_DEST_4_LOGROTATE='/etc/init.d/syslogd restart' # cmd to run after logr SYSLOGD_MARK_INTERVAL='20' # mark interval in minutes, 0 = off SYSLOGD_LOG_COUNT='10' # number of log files to save SYSLOGD_LOG_INTERVAL='monthly' # interval: daily, weekly, monthly SYSLOGD_OPTIONS='' # syslogd options, e.g. '-r' #------------------------------------------------------------------------------ # optional package: atd #------------------------------------------------------------------------------ START_ATD='no' # start atd: yes or no #------------------------------------------------------------------------------ # Keymapping #------------------------------------------------------------------------------ KEYMAP='de-latin1' # load german keymap #------------------------------------------------------------------------------ # Poweroff when halting. Works only if kernel 2.4 or higher installed #------------------------------------------------------------------------------ POWEROFF='yes' # poweroff: 'yes' or 'no' POWEROFF_SMP='no' # smp kernel: 'yes' or 'no' POWEROFF_REALMODE='no' # use realmode: 'yes' or 'no' #------------------------------------------------------------------------------ # Load additional kernel modules #------------------------------------------------------------------------------ MODULE_N='0' # number of modules to load MODULE_1='foo' # name of 1st module to load MODULE_1_OPTION='' # option(s) for module #------------------------------------------------------------------------------ # End #------------------------------------------------------------------------------