#-----------------------------------------------------------------------------
# /etc/config.d/base - eisfair boot configuration parameters
#
# Creation : 31.12.2001 fm
# Last Update: 2008-01-21 knuffel
#
# Copyright (c) 2001-2008 Frank Meyer <frank@eisfair.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#-----------------------------------------------------------------------------
#-----------------------------------------------------------------------------
# General settings:
#-----------------------------------------------------------------------------
HOSTNAME='eis' # name of eisfair server
#-----------------------------------------------------------------------------
# Ethernet card drivers:
#
# Name Kernel Bus Description
#-----------------------------------------------------------------------------
# 3c501 2.4.26/35 ISA 3COM EtherLink (3c501)
# 3c503 2.4.26/35 ISA 3COM EtherLinkII (3c503)
# 3c505 2.4.26/35 ISA 3COM Etherlink Plus (3c505)
# 3c507 2.4.26/35 ISA 3COM Etherlink 16 (3c507)
# 3c509 2.4.26/35 ISA 3COM EtherLinkIII (3c509)
# 3c515 2.4.26/35 ISA 3COM EtherLink XL (3c515)
# 3c574_cs 2.4.26/35 PCMCIA 3Com 574
# 3c589_cs 2.4.26/35 PCMCIA 3Com 589
# 3c59x 2.4.26/35 PCI 3COM Vortex/Boomerang 3c59x,3c900,3c905
# 8139cp 2.4.26/35 PCI RealTek 8139C+ 10/100
# 8139too 2.4.26/35 PCI RealTek 8139 10/100
# 82596 2.4.26/35 Apricot Xen-II on board Ethernet
# ac3200 2.4.26/35 EISA Ansel Communications 3200
# acenic 2.4.26/35 PCI Alteon AceNIC/3Com 3C985/NetGear GA620
# Gigabit
# airo 2.4.26/35 PCI/ISA Cisco Aironet 4500/4800 series cards
# airo_cs 2.4.26/35 PCMCIA Airo 4500/4800 series cards
# aironet4500_cs 2.4.26/35 PCMCIA Airo 4500/4800 series cards
# amd8111e 2.4.26/35 PCI AMD 8111 (new PCI lance)
# arcnet 2.4.26/35 Generic ARCnet
# arlan 2.4.26/35 PCI Aironet Arlan 655 & IC2200 DS
# at1700 2.4.26/35 ISA AT1700 (Fujitsu 86965)
# atmel 2.4.26/35 PCMCIA Atmel at76c502/at76c504/at76c506 wireless
# atmel_cs 2.4.26/35 PCMCIA Atmel at76c502/at76c504/at76c506 wireless
# atp 2.4.26/35 PAR AT-LAN-TEC/RealTek pocket adapter
# axnet_cs 2.4.26/35 PCMCIA Asix AX88190 Fast Ethernet
# b44 2.4.26/35 PCI Broadcom 4400 ethernet support
# bnx2 2.4.35 PCIExp Broadcom NetXtreme II Gigabit Ethernet
# com20020 2.4.26/35 PCMCIA ARCnet driver
# com20020_cs 2.4.26/35 PCMCIA ARCnet driver
# cs89x0 2.4.26/35 ISA IBM Etherjet, cs89x0 based Cards
# (option io=0xnnn necessary!)
# cs89x0_cs 2.4.26/35 PCMCIA IBM EtherJet Ethernet Adapter
# de4x5 2.4.26/35 PCI/EISA Digital DE425/DE434/DE435/DE450/DE500
# de600 2.4.35 D-Link DE-600 Ethernet Pocket Adapter
# de620 2.4.35 D-Link DE-620 Ethernet Pocket Adapter
# defxx 2.4.26/35 PCI Digital DEFEA and DEFPA adapter (FDDI)
# depca 2.4.26/35 PCI/EISA DEPCA DE10x/DE20x/DE210/DE422
# dgrs 2.4.26/35 PCI/EISA Digi International RightSwitch SE-X
# dl2k 2.4.26/35 PCI D-Link 2000-based Gigabit Ethernet
# dmfe 2.4.26/35 PCI Davicom DM9102(A)/DM9132/DM9801
# e100 2.4.26/35 PCI EtherExpress Pro/100
# e1000 2.4.26/35 PCI Intel(R) PRO/1000 Gigabit Ethernet
# e2100 2.4.26/35 ISA Cabletron E21xx
# eepro 2.4.26/35 ISA Intel EtherExpress Pro/10
# eepro100 2.4.26/35 PCI Intel EtherExpressPro PCI 10+/100B/100+
# eexpress 2.4.26/35 ISA EtherExpress16
# epic100 2.4.26/35 PCI SMC EPIC/100 (EtherPower II)
# eth16i 2.4.26/35 ISA/EISA ICL EtherTeam 16i/32
# ewrk3 2.4.26/35 ISA EtherWORKS 3 ISA (DE203, DE204, DE205)
# fealnx 2.4.26/35 PCI ASOUND LAN 8139 card - not RTL8139!
# fmvj18x_cs 2.4.26/35 PCMCIA Fujitsu FMV-181/182/183/184
# forcedeth 2.4.26/35 PCI nForce Ethernet
# hamachi 2.4.26/35 PCI Packet Engines Hamachi GNIC-II
# hostap_cs 2.4.35 PCMCIA PrismII/2.5/3 based cards
# hostap_pci 2.4.35 PCI Prism 2.5 based PCI Wlan cards
# hostap_plx 2.4.35 PCMCIA Prism 2,2.5 and 3 based PCMCIA WLan
# hp100 2.4.26/35 ISA/PCI HP 10/100VG PCLAN
# hp 2.4.26/35 ISA HP PCLAN (27245, 27xxx)
# hp-plus 2.4.26/35 ISA HP PCLAN+ (27247B and 27252A)
# iph5526 2.4.35 PCI Interphase 5526
# lance 2.4.26/35 ISA AMD LANCE and PCnet (AT1500, NE2100)
# lp486e 2.4.26/35 PCI LP486E on board Ethernet
# myson803 2.4.26 PCI Myson MTD-8xx PCI Ethernet
# natsemi 2.4.26/35 PCI NatSemi DP83815 Fast Ethernet
# ne 2.4.26/35 ISA NE2000 ISA clone (eg. Realtek 8019, Acc-
# ton 16xx, NatSemi 8390, UMC 9003/9008)
# ne2k-pci 2.4.26/35 PCI NE2000 PCI (eg. Realtek 8029, Winbond
# 89c940)
# netwave_cs 2.4.26/35 PCMCIA Netwave AirSurfer Wireless LAN
# ni5010 2.4.26/35 PCI MiCom-Interlan NI5010
# ni52 2.4.26/35 PCI NI5210-Karte (i82586 Ethernet-Chip)
# ni65 2.4.26/35 PCI NI6510 Ethernet
# nmclan_cs 2.4.26/35 PCMCIA New Media Ethernet LAN
# ns83820 2.4.26/35 PCI National Semiconductor DP83820, eg
# SMC 9452TX, SMC SMC9462TX, D-Link
# DGE-500T, PureData PDP8023Z-TG, SOHO-
# GA2000T, SOHO-GA2500T, NetGear GA621
# ns820 2.4.26 PCI Donald Becker's version of DP83820
# orinoco_cs 2.4.26/35 PCMCIA Orinoco based WLAN Cards
# orinoco_pci 2.4.26/35 PCI Lucent/Orinoco based WLAN-Cards
# orinoco_plx 2.4.26/35 PCI Lucent/Orinoco based PCMCIA WLAN-Cards
# in PLX adapter
# orinoco_tmd 2.4.26/35 PCI Lucent/Orinoco based WLAN-Cards with TMD
# PCI-Bridge
# pcnet32 2.4.26/35 PCI AMD PCnet32 and AMD PCnetPCI
# pcnet_cs 2.4.26/35 PCMCIA NS8390-based cards (NE2000, DLINK etc)
# prism54 2.4.35 PCI/PCMCIA PrismGT/PrismDuette/PrismIndigoChipsets
# r1000 2.4.35 PCI Realtek 816x/810x/811x Gigabit Ethernet
# r8169 2.4.26/35 PCI Realtek 8169 Gigabit Ethernet
# ray_cs 2.4.35 PCMCIA Raylink wireless cards
# rhinefet 2.4.26/35 PCI VIA Rhine Family Fast Ethernet Adapter
# sb1000 2.4.26/35 ISA General Instruments Surfboard 1000
# sis900 2.4.26/35 PCI SiS 900/7016
# sk98lin 2.4.26/35 PCI Marvell Yukon, SysKonnect SK-98xx
# and SK-95xx Gigabit
# skfp 2.4.26/35 PCI SysKonnect FDDI
# skge 2.4.35 PCI Marvell Yukon, SysKonnect SK-98xx
# sky2 2.4.35 PCI Marvell Yukon, SysKonnect SK-98xx
# smc-ultra 2.4.26/35 ISA SMC Ultra
# smc9194 2.4.26/35 PCI SMC 9194
# smc91c92_cs 2.4.26/35 PCMCIA SMC91c92-based cards
# starfire 2.4.26/35 PCI Starfire
# sundance 2.4.26/35 PCI DFE-550FX or DFE-530TXS
# sungem 2.4.26/35 PCI Sun GEM: GigabitEthernet/P 2.0
# sunhme 2.4.26/35 PCI Sun Happy Meal 10/100baseT
# tg3 2.4.26/35 PCI Broadcom Tigon3 Gigabit Ethernet
# tlan 2.4.26/35 PCI TI ThunderLAN (Compaq Netelligent ...)
# tulip 2.4.26/35 PCI DECchip Tulip (dc21x4x)
# typhoon 2.4.26/35 PCI 3CR990 series 'Typhoon'
# velocityget 2.4.35 PCI VIA Velocity Family Gigabit Ethernet
# via-rhine 2.4.26/35 PCI VIA Rhine PCI (3043, VT86c100A,
# dfe-530tx)
# wavelan_cs 2.4.26/35 PCMCIA WaveLAN
# wd 2.4.26/35 ISA SMC WD80*3
# winbond-840 2.4.26/35 PCI Winbond 840
# xirc2ps_cs 2.4.26/35 PCMCIA Xircom CE2/CEIIps/RE-10/CEM28/CEM33/CE33
# CEM56/CE3-100/CE3B/RE-100/REM10BT/
# REM56G-100
# xircom_cb 2.4.35 PCMCIA Xircom Cardbus ethernet cards
# xircom_tulip_cb 2.4.35 PCMCIA Xircom CBE-100
# yellowfin 2.4.26/35 PCI Yellowfin Gigabit-NIC/Symbios 53c885
#-----------------------------------------------------------------------------
ETH_DRV_N='1' # number of ethernet drivers to load
ETH_DRV_1='pcnet32' # driver name
ETH_DRV_1_OPTION='' # additional option, e.g. 'io=0x340' for
# ne
#-----------------------------------------------------------------------------
# Ether networks used with IP protocol:
#-----------------------------------------------------------------------------
IP_ETH_N='1' # number of ip ethernet networks
IP_ETH_1_NAME='' # optional: other device name than ethX
IP_ETH_1_IPADDR='192.168.6.254' # IP address of your n'th ethernet card
IP_ETH_1_NETWORK='192.168.6.0' # network of your LAN
IP_ETH_1_NETMASK='255.255.255.0' # netmask of your LAN
#-----------------------------------------------------------------------------
# Additional routes:
#-----------------------------------------------------------------------------
IP_DEFAULT_GATEWAY='192.168.6.1' # your default gateway, e.g. fli4l
IP_ROUTE_N='0' # number of additional routes
IP_ROUTE_1='192.168.7.0 255.255.255.0 192.168.6.99'
# network netmask gateway
#-----------------------------------------------------------------------------
# Domain & DNS server:
#-----------------------------------------------------------------------------
DOMAIN_NAME='lan.home' # your domain name
DNS_SERVER='192.168.6.1' # your dns server, e.g. fli4l router
#-----------------------------------------------------------------------------
# Time zone:
#-----------------------------------------------------------------------------
TIME_ZONE='CET' # time zone, use 'CET' or 'GMT'
#-----------------------------------------------------------------------------
# Optional PCMCIA support:
#-----------------------------------------------------------------------------
OPT_PCMCIA='no' # pcmcia cards used: yes or no
PCMCIA_PCIC='i82365' # pcmcia socket driver: 'i82365' or
# 'tcic'
PCMCIA_PCIC_OPTS='' # option for socket driver, usually
# empty
PCMCIA_CORE_OPTS='' # option for pcmcia core driver, usually
# empty
PCMCIA_CARDMGR_OPTS='' # option for pcmcia card manager,
# usually empty
#-----------------------------------------------------------------------------
# Optional syslogd:
#-----------------------------------------------------------------------------
START_SYSLOGD='yes' # start syslogd & klogd: yes or no
SYSLOGD_DEST_N='1' # number of destinations
SYSLOGD_DEST_1='*.* /var/log/messages'
# prio & destination of syslog msgs
SYSLOGD_DEST_1_LOGROTATE='/etc/init.d/syslogd restart'
# cmd to run after logrotate
SYSLOGD_DEST_2='*.* /dev/console' # example: log to console
SYSLOGD_DEST_2_LOGROTATE='' # cmd to run after logrotate
SYSLOGD_DEST_3='*.* @192.168.6.2' # example: loghost 192.168.6.2
SYSLOGD_DEST_3_LOGROTATE='' # cmd to run after logrotate
SYSLOGD_DEST_4='kern.info /var/log/infos'
# example: log infos
SYSLOGD_DEST_4_LOGROTATE='/etc/init.d/syslogd restart'
# cmd to run after logrotate
SYSLOGD_MARK_INTERVAL='20' # mark interval in minutes, 0 = off
SYSLOGD_LOG_COUNT='10' # number of log files to save
SYSLOGD_LOG_INTERVAL='monthly' # interval: daily, weekly, monthly
SYSLOGD_OPTIONS='' # syslogd options, e.g. '-r'
#-----------------------------------------------------------------------------
# Optional atd:
#-----------------------------------------------------------------------------
START_ATD='no' # start atd: yes or no
#-----------------------------------------------------------------------------
# Keymapping:
#-----------------------------------------------------------------------------
KEYMAP='de-latin1' # load german keymap
#-----------------------------------------------------------------------------
# Poweroff when halting. Works only if kernel 2.4 or higher installed:
#-----------------------------------------------------------------------------
POWEROFF='yes' # poweroff: 'yes' or 'no'
POWEROFF_SMP='no' # smp kernel: 'yes' or 'no'
POWEROFF_REALMODE='no' # use realmode: 'yes' or 'no'
#-----------------------------------------------------------------------------
# Load additional kernel modules:
#-----------------------------------------------------------------------------
MODULE_N='0' # number of modules to load
MODULE_1='foo' # name of module to load
MODULE_1_OPTION='' # option(s) for module
#-----------------------------------------------------------------------------
# End
#-----------------------------------------------------------------------------