#----------------------------------------------------------------------------- # /etc/config.d/base - eisfair boot configuration parameters # # Creation : 2001-12-31 fm # Last Update: $Id$ # # Copyright (c) 2001-2009 the eisfair team, team(at)eisfair(dot)org # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. #----------------------------------------------------------------------------- #----------------------------------------------------------------------------- # General settings: #----------------------------------------------------------------------------- HOSTNAME='eis' # name of eisfair server #----------------------------------------------------------------------------- # Ethernet card drivers: # # Name Kernel Bus Description #----------------------------------------------------------------------------- # 3c501 2.4.26/35 ISA 3COM EtherLink (3c501) # 3c503 2.4.26/35 ISA 3COM EtherLinkII (3c503) # 3c505 2.4.26/35 ISA 3COM Etherlink Plus (3c505) # 3c507 2.4.26/35 ISA 3COM Etherlink 16 (3c507) # 3c509 2.4.26/35 ISA 3COM EtherLinkIII (3c509) # 3c515 2.4.26/35 ISA 3COM EtherLink XL (3c515) # 3c574_cs 2.4.26/35 PCMCIA 3Com 574 # 3c589_cs 2.4.26/35 PCMCIA 3Com 589 # 3c59x 2.4.26/35 PCI 3COM Vortex/Boomerang 3c59x,3c900,3c905 # 8139cp 2.4.26/35 PCI RealTek 8139C+ 10/100 # 8139too 2.4.26/35 PCI RealTek 8139 10/100 # 82596 2.4.26/35 Apricot Xen-II on board Ethernet # ac3200 2.4.26/35 EISA Ansel Communications 3200 # acenic 2.4.26/35 PCI Alteon AceNIC/3Com 3C985/NetGear GA620 # Gigabit # airo 2.4.26/35 PCI/ISA Cisco Aironet 4500/4800 series cards # airo_cs 2.4.26/35 PCMCIA Airo 4500/4800 series cards # aironet4500_cs 2.4.26/35 PCMCIA Airo 4500/4800 series cards # amd8111e 2.4.26/35 PCI AMD 8111 (new PCI lance) # arcnet 2.4.26/35 Generic ARCnet # arlan 2.4.26/35 PCI Aironet Arlan 655 & IC2200 DS # at1700 2.4.26/35 ISA AT1700 (Fujitsu 86965) # atmel 2.4.26/35 PCMCIA Atmel at76c502/at76c504/at76c506 wireless # atmel_cs 2.4.26/35 PCMCIA Atmel at76c502/at76c504/at76c506 wireless # atp 2.4.26/35 PAR AT-LAN-TEC/RealTek pocket adapter # axnet_cs 2.4.26/35 PCMCIA Asix AX88190 Fast Ethernet # b44 2.4.26/35 PCI Broadcom 4400 ethernet support # bnx2 2.4.35 PCIExp Broadcom NetXtreme II Gigabit Ethernet # com20020 2.4.26/35 PCMCIA ARCnet driver # com20020_cs 2.4.26/35 PCMCIA ARCnet driver # cs89x0 2.4.26/35 ISA IBM Etherjet, cs89x0 based Cards # (option io=0xnnn necessary!) # cs89x0_cs 2.4.26/35 PCMCIA IBM EtherJet Ethernet Adapter # de4x5 2.4.26/35 PCI/EISA Digital DE425/DE434/DE435/DE450/DE500 # de600 2.4.35 D-Link DE-600 Ethernet Pocket Adapter # de620 2.4.35 D-Link DE-620 Ethernet Pocket Adapter # defxx 2.4.26/35 PCI Digital DEFEA and DEFPA adapter (FDDI) # depca 2.4.26/35 PCI/EISA DEPCA DE10x/DE20x/DE210/DE422 # dgrs 2.4.26/35 PCI/EISA Digi International RightSwitch SE-X # dl2k 2.4.26/35 PCI D-Link 2000-based Gigabit Ethernet # dmfe 2.4.26/35 PCI Davicom DM9102(A)/DM9132/DM9801 # e100 2.4.26/35 PCI EtherExpress Pro/100 # e1000 2.4.26/35 PCI Intel(R) PRO/1000 Gigabit Ethernet # e2100 2.4.26/35 ISA Cabletron E21xx # eepro 2.4.26/35 ISA Intel EtherExpress Pro/10 # eepro100 2.4.26/35 PCI Intel EtherExpressPro PCI 10+/100B/100+ # eexpress 2.4.26/35 ISA EtherExpress16 # epic100 2.4.26/35 PCI SMC EPIC/100 (EtherPower II) # eth16i 2.4.26/35 ISA/EISA ICL EtherTeam 16i/32 # ewrk3 2.4.26/35 ISA EtherWORKS 3 ISA (DE203, DE204, DE205) # fealnx 2.4.26/35 PCI ASOUND LAN 8139 card - not RTL8139! # fmvj18x_cs 2.4.26/35 PCMCIA Fujitsu FMV-181/182/183/184 # forcedeth 2.4.26/35 PCI nForce Ethernet # hamachi 2.4.26/35 PCI Packet Engines Hamachi GNIC-II # hostap_cs 2.4.35 PCMCIA PrismII/2.5/3 based cards # hostap_pci 2.4.35 PCI Prism 2.5 based PCI Wlan cards # hostap_plx 2.4.35 PCMCIA Prism 2,2.5 and 3 based PCMCIA WLan # hp100 2.4.26/35 ISA/PCI HP 10/100VG PCLAN # hp 2.4.26/35 ISA HP PCLAN (27245, 27xxx) # hp-plus 2.4.26/35 ISA HP PCLAN+ (27247B and 27252A) # iph5526 2.4.35 PCI Interphase 5526 # lance 2.4.26/35 ISA AMD LANCE and PCnet (AT1500, NE2100) # lp486e 2.4.26/35 PCI LP486E on board Ethernet # myson803 2.4.26 PCI Myson MTD-8xx PCI Ethernet # natsemi 2.4.26/35 PCI NatSemi DP83815 Fast Ethernet # ne 2.4.26/35 ISA NE2000 ISA clone (eg. Realtek 8019, Acc- # ton 16xx, NatSemi 8390, UMC 9003/9008) # ne2k-pci 2.4.26/35 PCI NE2000 PCI (eg. Realtek 8029, Winbond # 89c940) # netwave_cs 2.4.26/35 PCMCIA Netwave AirSurfer Wireless LAN # ni5010 2.4.26/35 PCI MiCom-Interlan NI5010 # ni52 2.4.26/35 PCI NI5210-Karte (i82586 Ethernet-Chip) # ni65 2.4.26/35 PCI NI6510 Ethernet # nmclan_cs 2.4.26/35 PCMCIA New Media Ethernet LAN # ns83820 2.4.26/35 PCI National Semiconductor DP83820, eg # SMC 9452TX, SMC SMC9462TX, D-Link # DGE-500T, PureData PDP8023Z-TG, SOHO- # GA2000T, SOHO-GA2500T, NetGear GA621 # ns820 2.4.26 PCI Donald Becker's version of DP83820 # orinoco_cs 2.4.26/35 PCMCIA Orinoco based WLAN Cards # orinoco_pci 2.4.26/35 PCI Lucent/Orinoco based WLAN-Cards # orinoco_plx 2.4.26/35 PCI Lucent/Orinoco based PCMCIA WLAN-Cards # in PLX adapter # orinoco_tmd 2.4.26/35 PCI Lucent/Orinoco based WLAN-Cards with TMD # PCI-Bridge # pcnet32 2.4.26/35 PCI AMD PCnet32 and AMD PCnetPCI # pcnet_cs 2.4.26/35 PCMCIA NS8390-based cards (NE2000, DLINK etc) # prism54 2.4.35 PCI/PCMCIA PrismGT/PrismDuette/PrismIndigoChipsets # r1000 2.4.35 PCI Realtek 816x/810x/811x Gigabit Ethernet # r8169 2.4.26/35 PCI Realtek 8169 Gigabit Ethernet # ray_cs 2.4.35 PCMCIA Raylink wireless cards # rhinefet 2.4.26/35 PCI VIA Rhine Family Fast Ethernet Adapter # sb1000 2.4.26/35 ISA General Instruments Surfboard 1000 # sis900 2.4.26/35 PCI SiS 900/7016 # sk98lin 2.4.26/35 PCI Marvell Yukon, SysKonnect SK-98xx # and SK-95xx Gigabit # skfp 2.4.26/35 PCI SysKonnect FDDI # skge 2.4.35 PCI Marvell Yukon, SysKonnect SK-98xx # sky2 2.4.35 PCI Marvell Yukon, SysKonnect SK-98xx # smc-ultra 2.4.26/35 ISA SMC Ultra # smc9194 2.4.26/35 PCI SMC 9194 # smc91c92_cs 2.4.26/35 PCMCIA SMC91c92-based cards # starfire 2.4.26/35 PCI Starfire # sundance 2.4.26/35 PCI DFE-550FX or DFE-530TXS # sungem 2.4.26/35 PCI Sun GEM: GigabitEthernet/P 2.0 # sunhme 2.4.26/35 PCI Sun Happy Meal 10/100baseT # tg3 2.4.26/35 PCI Broadcom Tigon3 Gigabit Ethernet # tlan 2.4.26/35 PCI TI ThunderLAN (Compaq Netelligent ...) # tulip 2.4.26/35 PCI DECchip Tulip (dc21x4x) # typhoon 2.4.26/35 PCI 3CR990 series 'Typhoon' # velocityget 2.4.35 PCI VIA Velocity Family Gigabit Ethernet # via-rhine 2.4.26/35 PCI VIA Rhine PCI (3043, VT86c100A, # dfe-530tx) # wavelan_cs 2.4.26/35 PCMCIA WaveLAN # wd 2.4.26/35 ISA SMC WD80*3 # winbond-840 2.4.26/35 PCI Winbond 840 # xirc2ps_cs 2.4.26/35 PCMCIA Xircom CE2/CEIIps/RE-10/CEM28/CEM33/CE33 # CEM56/CE3-100/CE3B/RE-100/REM10BT/ # REM56G-100 # xircom_cb 2.4.35 PCMCIA Xircom Cardbus ethernet cards # xircom_tulip_cb 2.4.35 PCMCIA Xircom CBE-100 # yellowfin 2.4.26/35 PCI Yellowfin Gigabit-NIC/Symbios 53c885 #----------------------------------------------------------------------------- ETH_DRV_N='1' # number of ethernet drivers to load ETH_DRV_1='pcnet32' # driver name ETH_DRV_1_OPTION='' # additional option, e.g. 'io=0x340' for # ne #----------------------------------------------------------------------------- # Ether networks used with IP protocol: #----------------------------------------------------------------------------- IP_ETH_N='1' # number of ip ethernet networks IP_ETH_1_NAME='' # optional: other device name than ethX IP_ETH_1_IPADDR='192.168.6.254' # IP address of your n'th ethernet card IP_ETH_1_NETWORK='192.168.6.0' # network of your LAN IP_ETH_1_NETMASK='255.255.255.0' # netmask of your LAN #----------------------------------------------------------------------------- # Additional routes: #----------------------------------------------------------------------------- IP_DEFAULT_GATEWAY='192.168.6.1' # your default gateway, e.g. fli4l IP_ROUTE_N='0' # number of additional routes IP_ROUTE_1='192.168.7.0 255.255.255.0 192.168.6.99' # network netmask gateway #----------------------------------------------------------------------------- # Domain & DNS server: #----------------------------------------------------------------------------- DOMAIN_NAME='lan.home' # your domain name DNS_SERVER='192.168.6.1' # your dns server, e.g. fli4l router #----------------------------------------------------------------------------- # Time zone: #----------------------------------------------------------------------------- TIME_ZONE='CET' # time zone, use 'CET' or 'GMT' #----------------------------------------------------------------------------- # Optional PCMCIA support: #----------------------------------------------------------------------------- START_PCMCIA='no' # pcmcia cards used: yes or no PCMCIA_PCIC='i82365' # pcmcia socket driver: 'i82365' or # 'tcic' PCMCIA_PCIC_OPTS='' # option for socket driver, usually # empty PCMCIA_CORE_OPTS='' # option for pcmcia core driver, usually # empty PCMCIA_CARDMGR_OPTS='' # option for pcmcia card manager, # usually empty PCMCIA_SCHEME='' # option for pcmcia scheme, usually empty #----------------------------------------------------------------------------- # Optional syslogd: #----------------------------------------------------------------------------- START_SYSLOGD='yes' # start syslogd & klogd: yes or no SYSLOGD_DEST_N='1' # number of destinations SYSLOGD_DEST_1='*.* /var/log/messages' # prio & destination of syslog msgs SYSLOGD_DEST_1_LOGROTATE='/etc/init.d/syslogd restart' # cmd to run after logrotate SYSLOGD_DEST_2='*.* /dev/console' # example: log to console SYSLOGD_DEST_2_LOGROTATE='' # cmd to run after logrotate SYSLOGD_DEST_3='*.* @192.168.6.2' # example: loghost 192.168.6.2 SYSLOGD_DEST_3_LOGROTATE='' # cmd to run after logrotate SYSLOGD_DEST_4='kern.info /var/log/infos' # example: log infos SYSLOGD_DEST_4_LOGROTATE='/etc/init.d/syslogd restart' # cmd to run after logrotate SYSLOGD_MARK_INTERVAL='20' # mark interval in minutes, 0 = off SYSLOGD_LOG_COUNT='10' # number of log files to save SYSLOGD_LOG_INTERVAL='monthly' # interval: daily, weekly, monthly SYSLOGD_OPTIONS='' # syslogd options, e.g. '-r' #----------------------------------------------------------------------------- # Optional atd: #----------------------------------------------------------------------------- START_ATD='no' # start atd: yes or no #----------------------------------------------------------------------------- # Keymapping: #----------------------------------------------------------------------------- KEYMAP='de-latin1' # load german keymap #----------------------------------------------------------------------------- # Poweroff when halting. Works only if kernel 2.4 or higher installed: #----------------------------------------------------------------------------- POWEROFF='yes' # poweroff: 'yes' or 'no' POWEROFF_SMP='no' # smp kernel: 'yes' or 'no' POWEROFF_REALMODE='no' # use realmode: 'yes' or 'no' #----------------------------------------------------------------------------- # Load additional kernel modules: #----------------------------------------------------------------------------- MODULE_N='0' # number of modules to load MODULE_1='foo' # name of module to load MODULE_1_OPTION='' # option(s) for module #----------------------------------------------------------------------------- # End #-----------------------------------------------------------------------------