This specifies the name of your machine.
Examples: 'eis', 'iceland' ...
Number of modules that shall be loaded to operate your network cards.
Kernel module that has to be loaded for a specific network card. Here is a list
of possible module names:
Name Kernel Bus Description
3c501 2.6.32 ISA 3COM EtherLink (3c501)
3c503 2.6.32 ISA 3COM EtherLinkII (3c503)
3c505 2.6.32 ISA 3COM Etherlink Plus (3c505)
3c507 2.6.32 ISA 3COM Etherlink 16 (3c507)
3c509 2.6.32 ISA 3COM EtherLinkIII (3c509)
3c515 2.6.32 ISA 3COM EtherLink XL (3c515)
3c574_cs 2.6.32 PCMCIA 3Com 574
3c589_cs 2.6.32 PCMCIA 3Com 589
3c59x 2.6.32 PCI 3COM Vortex/Boomerang
3c59x,3c900,3c905
8139cp 2.6.32 PCI RealTek 8139C+ 10/100
8139too 2.6.32 PCI RealTek 8139 10/10
82596 2.6.32 Apricot Xen-II on board Ethernet
ac3200 2.6.32 EISA Ansel Communications 3200
acenic 2.6.32 PCI Alteon AceNIC/3Com 3C985/NetGear
GA620 Gigabit
airo 2.6.32 PCI/ISA Cisco Aironet 4500/4800 series cards
airo_cs 2.6.32 PCMCIA Airo 4500/4800 series cards
amd8111e 2.6.32 PCI AMD 8111 (new PCI lance)
arcnet 2.6.32 Generic ARCnet
arc-rimi 2.6.32 ARCnet COM90xx (RIM I) chipset driver
arlan 2.6.32 PCI Aironet Arlan 655 & IC2200 DS
at1700 2.6.32 ISA AT1700 (Fujitsu 86965)
atl1c 2.6.32 PCI Atheros/Attansic L1C Gigabit Ethernet
atl1e 2.6.32 PCI Atheros/Attansic L1E Gigabit Ethernet
atl1 2.6.32 PCI Atheros/Attansic L1 Gigabit Ethernet
atl2 2.6.32 PCI Atheros/Attansic L2 Fast Ethernet
atmel 2.6.32 PCMCIA Atmel at76c502/at76c504/at76c506
wireless
atmel_cs 2.6.32 PCMCIA Atmel at76c502/at76c504/at76c506
wireless
atp 2.6.32 PAR AT-LAN-TEC/RealTek pocket adapter
b44 2.6.32 PCI Broadcom 4400 ethernet support
bnx2 2.6.32 PCI-Exp Broadcom NetXtreme II
Gigabit Ethernet
com20020 2.6.32 PCMCIA ARCnet driver
com20020_cs 2.6.32 PCMCIA ARCnet driver
com90xx 2.6.32 PCI/ISA ARCnet COM90xx (normal) chipset
driver
com90io 2.6.32 PCI/ISA ARCnet COM90xx (IO mapped) chipset
driver
cs89x0 2.6.32 ISA IBM Etherjet, cs89x0 based Cards
(option io=0xnnn necessary!)
cs89x0_cs 2.6.32 PCMCIA IBM EtherJet Ethernet Adapter
de4x5 2.6.32 PCI/EISA Digital DE425/DE434/DE435/DE450/DE500
de600 2.6.32 PARPORT D-Link DE-600 Ethernet Pocket Adapter
de620 2.6.32 PARPORT D-Link DE-620 Ethernet Pocket Adapter
defxx 2.6.32 PCI Digital DEFEA and DEFPA adapter
(FDDI)
depca 2.6.32 PCI/EISA DEPCA DE10x/DE20x/DE210/DE422
dl2k 2.6.32 PCI D-Link 2000-based Gigabit Ethernet
dmfe 2.6.32 PCI Davicom DM9102(A)/DM9132/DM9801
e100 2.6.32 PCI EtherExpress Pro/100
e1000 2.6.32 PCI Intel(R) PRO/1000 Gigabit Ethernet
e1000e 2.6.32 PCI-Exp Intel(R) PRO/1000 Gigabit Ethernet
e2100 2.6.32 ISA Cabletron E21xx
eepro 2.6.32 ISA Intel EtherExpress Pro/10
eexpress 2.6.32 ISA EtherExpress16
epic100 2.6.32 PCI SMC EPIC/100 (EtherPower II)
eth16i 2.6.32 ISA/EISA ICL EtherTeam 16i/32
ewrk3 2.6.32 ISA EtherWORKS 3 ISA (DE203, DE204,
DE205)
fealnx 2.6.32 PCI ASOUND LAN 8139 card - not RTL8139!
fmvj18x_cs 2.6.32 PCMCIA Fujitsu FMV-181/182/183/184
forcedeth 2.6.32 PCI nForce Ethernet
hamachi 2.6.32 PCI Packet Engines Hamachi GNIC-II
hostap_cs 2.6.32 PCMCIA PrismII/2.5/3 based cards
hostap_pci 2.6.32 PCI Prism 2.5 based PCI Wlan cards
hostap_plx 2.6.32 PCMCIA Prism 2,2.5 and 3 based PCMCIA WLan
hp100 2.6.32 ISA/PCI HP 10/100VG PCLAN
hp 2.6.32 ISA HP PCLAN (27245, 27xxx)
hp-plus 2.6.32 ISA HP PCLAN+ (27247B and 27252A)
lance 2.6.32 ISA AMD LANCE and PCnet (AT1500, NE2100)
lp486e 2.6.32 PCI LP486E on board Ethernet
natsemi 2.6.32 PCI NatSemi DP83815 Fast Ethernet
ne 2.6.32 ISA NE2000 ISA clone (eg. Realtek 8019,
Accton 16xx, NatSemi 8390,
UMC 9003/9008)
ne2k-pci 2.6.32 PCI NE2000 PCI (eg. Realtek 8029, Winbond
89c940)
netwave_cs 2.6.32 PCMCIA Netwave AirSurfer Wireless LAN
ni5010 2.6.32 PCI MiCom-Interlan NI5010
ni52 2.6.32 PCI NI5210-Karte (i82586 Ethernet-Chip)
ni65 2.6.32 PCI NI6510 Ethernet
nmclan_cs 2.6.32 PCMCIA New Media Ethernet LAN
ns83820 2.6.32 PCI National Semiconductor DP83820, eg
SMC 9452TX, SMC SMC9462TX, D-Link
DGE-500T, PureData PDP8023Z-TG, SOHO-
GA2000T, SOHO-GA2500T, NetGear GA621
orinoco_cs 2.6.32 PCMCIA Orinoco based WLAN Cards
orinoco_pci 2.6.32 PCI Lucent/Orinoco based WLAN-Cards
orinoco_plx 2.6.32 PCI Lucent/Orinoco based PCMCIA
WLAN-Cards in PLX adapter
orinoco_tmd 2.6.32 PCI Lucent/Orinoco based WLAN-Cards with
TMD PCI-Bridge
pcnet32 2.6.32 PCI AMD PCnet32 and AMD PCnetPCI
pcnet_cs 2.6.32 PCMCIA NS8390-based cards (NE2000, DLINK
etc)
prism54 2.6.32 PCI/PCMCIA PrismGT/PrismDuette/
PrismIndigoChipsets
r6040 2.6.32 PCI RDC R6040 Fast Ethernet
r8169 2.6.32 PCI Realtek 8169/8110 Gigabit Ethernet
ray_cs 2.6.32 PCMCIA Raylink wireless cards
sb1000 2.6.32 ISA General Instruments Surfboard 1000
sis190 2.6.32 PCI SiS190/SiS191 Gigabit Ethernet
sis900 2.6.32 PCI SiS 900/7016
skfp 2.6.32 PCI SysKonnect FDDI
skge 2.6.32 PCI Marvell Yukon, SysKonnect SK-98xx
sky2 2.6.32 PCI Marvell Yukon, SysKonnect SK-98xx
smc-ultra 2.6.32 ISA SMC Ultra
smc9194 2.6.32 PCI SMC 9194"
smc91c92_cs 2.6.32 PCMCIA SMC91c92-based cards
starfire 2.6.32 PCI Starfire
sundance 2.6.32 PCI DFE-550FX or DFE-530TXS
sungem 2.6.32 PCI Sun GEM: GigabitEthernet/P 2.0
sunhme 2.6.32 PCI Sun Happy Meal 10/100baseT
tg3 2.6.32 PCI Broadcom Tigon3 Gigabit Ethernet
tlan 2.6.32 PCI TI ThunderLAN (Compaq Netelligent ...)
tulip 2.6.32 PCI DECchip Tulip (dc21x4x)
typhoon 2.6.32 PCI 3CR990 series 'Typhoon'
via-velocity 2.6.32 PCI VIA Velocity Family Gigabit Ethernet
via-rhine 2.6.32 PCI VIA Rhine PCI (3043, VT86c100A,
dfe-530tx)
vmxnet3 2.6.32 VIRTUAL VMWARE virtual Ethernet
wavelan_cs 2.6.32 PCMCIA WaveLAN
wd 2.6.32 ISA SMC WD80*3
winbond-840 2.6.32 PCI Winbond 840
xirc2ps_cs 2.6.32 PCMCIA Xircom CE2/CEIIps/RE-10/CEM28/
CEM33/CE33/CEM56/CE3-100/CE3B/
RE-100/REM10BT/REM56G-100
xircom_cb 2.6.32 PCMCIA Xircom Cardbus ethernet cards
yellowfin 2.6.32 PCI Yellowfin Gigabit-NIC/Symbios 53c885
Additional options that have to be supplied when the module is loaded. Very ofter this are hardware
parameters such as interrupts, io- or memory addresses or tranceiver types.
Examples: irq=11 io=0x300 ...
Number of local networks connected to your machine.
Other device name than ethX (optional).
IP address of your n'th ethernet card.
Example: 192.168.0.1
Network of your LAN.
Example: 192.168.0.0
Netmask of your LAN.
Example: 255.255.255.0
Your default gateway. A default gateway is the machine that routes network traffic from
and to other networks. Very often this is the router connected to the internet.
Examples: fli4l router ...
Number of additional routes.
Additional route: network netmask gateway
Example: "192.168.7.0 255.255.255.0 192.168.6.99" routes all network traffic related to
network "192.168.7.0/24" to the gateway machine "192.168.6.99"
Your domain name. The local domain your machine is a member of. All unqualified host names
will automatically be expanded with the local domain suffix.
Example: local.network
The IP-Adress of the machine that hosts the DNS-Server of your local network. A DNS-Server
is required to translate host names to IP-Adresses.
Example: "127.0.0.1" the DNS-Server runs on this eisfair server.
Time zone, use "CET" or "GMT"
Shall PCMCIA support be activated on this machine? "yes" or "no"
PCMCIA socket driver: "i82365" or "tcic"
Additional options for the socket driver. Usually empty.
Additional options for the PCMCIA core driver. Usually empty.
Additional options for the PCMCIA card manager. Usually empty.
Additional options for the PCMCIA scheme. Usually empty.
To activate this configuration just switch this entry to 'yes'.
No cron job will be done with this entry set to 'no'.
Legal-value: yes, no
Default-value: START_SYSLOGD='yes'
Here you can enter how many syslog jobs you would like to configure.
Legal-value: Numeric
Default-value: SYSLOGD_DEST_N='1'
Here you can write some information like a job description or
something else. SYSLOGD does not use this entry, it's only for your
information.
Legal-value: everything
Default-value: SYSLOG_DEST_%_NAME='syslogd'
Here you can activate this SYSLOGD job.
Legal-value: yes, no
Default-value: SYSLOGD_DEST_%_ACTIVE'='no'
Here you can enter how many SYSLOGD jobs you would like to configure.
Legal-value: Numeric
Default-value: SYSLOGD_DEST_%_SOURCE_N='1'
Here you can write some information like a job description or
something else. SYSLOGD does not use this entry, it's only for your
information.
Legal-value: everything
Default-value: SYSLOGD_DEST_%_SOURCE_%_NAME='all'
Here you can activate this SYSLOGD job.
Legal-value: yes, no
Default-value: SYSLOGD_DEST_%_SOURCE_%_ACTIVE'='no'
Here can you write the source you will log
Example 1: "*.*" causes all messages to be written to the
specified file.
Example 2: "kern.info" causes messages 'kern.info' to be redirected
to another machine.
Default-value: SYSLOGD_DEST_%_SOURCE_%'='*.*'
Here can you write the target fore the source.
Example 1: "/var/log/messages" causes all messages to be written to the
specified file.
Example 2: "@192.168.6.2" causes messages to be redirected
to another machine.
Example 3: "/dev/console" causes all messages to be write to the
console
.
Legal-value: fult pathname to logfile or destination
Default-value: SYSLOGD_DEST_%_TARGET'='/var/log/messages'
Command to be executed before logrotate
Legal-value: full path to executable
Default-value: SYSLOGD_DEST_%_PREROTATE_CMD'=''.
Command to be executed after logrotate.
Legal-value: full path to executable
Default-value: SYSLOGD_DEST_%_POSTROTATE_CMD'='/etc/init.d/syslogd restart'
Mark interval in minutes, 0 = off. When this value is greater than zero, a
"--- MARK ---" message is generated every n minutes and written to your
system logs.
Number of log files to save. This is the number of log file archives that are kept
on the system by logrotate, before they are outdated and removed.
Logrotate interval: daily, weekly, monthly. How often shall logrotate be executed?
Additional options for syslog deamon. Example "-r".
Shall the AT-deamon be started? "yes" or "no"
Keyboard mapping. Use "de-latin1" for german keyboards.
Shall the system be switched off automatically after shutdown? "yes" or "no".
Power off a machine running the SMP kernel? "yes" or "no".
Use realmode? "yes" or "no"
Number of additional modules (drivers) to be loaded on system startup.
Name of the module to load.
Additional options that have to be supplied when the module is loaded.