#
# spec file for package lz4
#
# Copyright (c) 2019 SUSE LINUX GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via https://bugs.opensuse.org/
#
%define lname liblz4-1
Name: lz4
Version: 1.9.2
Release: 1.1
Summary: Hash-based Predictive Lempel–Ziv compressor
License: GPL-2.0-or-later AND BSD-2-Clause
Group: Productivity/Archiving/Compression
Url: https://lz4.github.io/lz4/
#Git-Clone: https://github.com/lz4/lz4
Source: https://github.com/lz4/lz4/archive/v%version.tar.gz#/%name-%version.tar.gz
Source99: baselibs.conf
Patch2: lz-export.diff
BuildRequires: pkgconfig
%description
LZ4 is a lossless data compression algorithm that is focused on
compression and decompression speed. It belongs to the LZ77
(Lempel–Ziv) family of byte-oriented compression schemes. It is a
LZP2 fork and provides better compression ratio for text files.
This subpackage provides a GPL command-line utility to make use of
the LZ4 algorithm.
%package -n %lname
Summary: Hash-based predictive Lempel-Ziv compressor
License: BSD-2-Clause
Group: System/Libraries
%description -n %lname
LZ4 is a lossless data compression algorithm that is focused on
compression and decompression speed. It belongs to the LZ77
(Lempel–Ziv) family of byte-oriented compression schemes. It is a
This subpackage contains the (de)compressor code as a shared library.
%package -n liblz4-devel
Summary: Development files for the LZ4 compressor
License: BSD-2-Clause
Group: Development/Libraries/C and C++
Requires: %lname = %version
%description -n liblz4-devel
LZ4 is a lossless data compression algorithm that is focused on
compression and decompression speed. It belongs to the LZ77
(Lempel–Ziv) family of byte-oriented compression schemes. It is a
This subpackage contains libraries and header files for developing
applications that want to make use of liblz4.
%prep
%setup -q
%patch -P 2 -p1
%build
V=1 make %{?_smp_mflags} CFLAGS="%optflags"
%install
%make_install PREFIX="%_prefix" LIBDIR="%_libdir"
rm -f "%buildroot/%_libdir"/*.a
%check
LD_LIBRARY_PATH="%buildroot/%_libdir" ldd -r "%buildroot/%_bindir/lz4"
make %{?_smp_mflags} check
%post -n %lname -p /sbin/ldconfig
%postun -n %lname -p /sbin/ldconfig
%files
%_bindir/lz4*
%_bindir/unlz4
%_mandir/man1/*.1*
%files -n %lname
%_libdir/liblz4.so.1*
%files -n liblz4-devel
%_includedir/lz4*.h
%_libdir/liblz4.so
%_libdir/pkgconfig/*.pc
%changelog
* Wed Oct 16 2019 pgajdos@suse.com
- enable testsuite
- verbose build
* Tue Oct 15 2019 pgajdos@suse.com
- version update to 1.9.2
* decompression functions were reading a few bytes beyond input size
* api: lz4frame initializers compatibility with c++, reported by @degski
* cli : added command --list, based on a patch by @gabrielstedman
* Thu Jun 6 2019 Jan Engelhardt <jengelh@inai.de>
- Update to new upstream release 1.9.1
* Decompression speed was improved by about 12%% (x86/x64).
* New option `lz4 --list` to inspect the block type, checksum
information, compressed and decompressed sizes (if present). The
command is limited to single-frame files for the time being.
* Fri Oct 12 2018 astieger@suse.com
- lz4 1.8.3:
* minor decompression speed improvement (~+2%%) with gcc
* fix corruption in v1.8.2 at level 9 for files > 64KB under
rare conditions
* Add new command --fast
* api: LZ4_decompress_safe_partial() now decodes exactly the
number of bytes requested
* Thu Jun 28 2018 astieger@suse.com
- lz4 1.8.2:
* speed inprovemtns for compression and decompression
* fix compression compatible with low memory addresses
* fix decompression segfault when provided with NULL input
* cli: new command --favor-decSpeed
* cli: benchmark mode more accurate for small inputs
* Wed Feb 7 2018 avindra@opensuse.org
- Update to new upstream release 1.8.1.2
* Most visible new feature is support for dictionary compression
* Support is now more formally added on the API side within
lib/lz4frame_static.h. It's early days, and this new API is
tagged "experimental" for the time being.
* Support is also added in the command line utility lz4, using
the new command -D. The behavior of this command is identical
to zstd, should you be already familiar.
* lz4 doesn't specify how to build a dictionary. All it says is
that it can be any file up to 64 KB.
* This approach is compatible with zstd dictionary builder, which
can be instructed to create a 64 KB dictionary.
* Improved performance at ultra settings (levels 10+).
* These levels receive a new code, called optimal parser,
available in lib/lz4_opt.h.
* New parser uses less memory (from 384KB to 256KB), performs
faster, compresses a little bit better (not much, as it was
already close to theoretical limit), and resists pathological
patterns which could destroy performance.
* New parser is directly compatible with lower compression levels,
which brings additional benefits:
+ Compatibility with LZ4_*_destSize() variant, which reverses
the logic by trying to fit as much data as possible into a
predefined limited size buffer.
+ Compatibility with Dictionary compression, as it uses the
same tables as regular HC mode
* In the future, this compatibility will also allow dynamic change
of compression level.
* Small set of bug fixes and improvements:
+ perf : faster and stronger ultra modes (levels 10+)
+ perf : slightly faster compression and decompression speed
+ perf : fix bad degenerative case
+ fix : decompression failed when using a combination of
extDict + low memory address
+ cli : support for dictionary compression (-D)
+ cli : fix : lz4 -d --rm preserves timestamp
+ cli : fix : do not modify /dev/null permission as root
+ api : _destSize() variant supported for all compression
levels
- partial cleanup with spec-cleaner
- drop lz4-use-shlib.diff, breaks build
- misc spec cleanups
- remove Makefile fix
- build and install separately
- New URL
* Fri Aug 25 2017 jengelh@inai.de
- Update to new upstream release 1.8.0
* cli: fix: do not modify /dev/null's permissions.
* cli: added POSIX separator "--" for specifying that all
following arguments are non-options.
* cli: restored -BX command enabling block checksum.
* API: added LZ4_compress_HC_destSize() and
LZ4F_resetDecompressionContext().
* API: lz4frame: negative compression levels trigger fast
acceleration.
* API: lz4frame: ability to control block checksum and
dictionary ID.
* API: fix: expose obsolete decoding functions
* API: experimental: lz4frame_static.h:
new dictionary compression API
* doc: Updated LZ4 Frame format to v1.6.0, restoring
Dictionary ID field in header.
- Add lz-export.diff
* Tue Aug 15 2017 ddiss@suse.com
- Use official upstream repository; (boo#1053910)
* Wed Jul 5 2017 jengelh@inai.de
- Update to new upstrema release 1.7.5 (2017-01-03)
* back to the old version scheme
* lz4hc: new compression levels 10-12
- Remove lz4-soversion.diff (not needed),
lz4-killdate.diff (no longer needed)
* Mon Jan 16 2017 dimstar@opensuse.org
- Add baselibs.conf: provide liblz4-1_7 as -32bit compatibility
package, required by systemd-32bit.
* Sat Apr 2 2016 jengelh@inai.de
- Update to new upstream release 131 (library 1.7) (boo#973735)
* slightly improved decoding speed
* lz4frame API is included in liblz4
* new -m command line option to compress multiple files
* new lz4 and lz4hc compression API (old one retained)
* Fri Nov 28 2014 jengelh@inai.de
- Update to version 1.4+svn124
* LZ4F_compressBound() may be called with NULL preferencesPtr
* LZ4_loadDict now returns the dictionary size instead of 1
on success
- Add lz4-soversion.diff to address ABI changes
* Wed Oct 1 2014 jengelh@inai.de
- Update to version 1.3.1+svn123
* Added a pkgconfig file
* Fix a LZ4HC streaming bug
* Updated the framing specificaiton to 1.4.1
* Wed Jul 16 2014 jengelh@inai.de
- Update to svn revision 119, set version to 1.2.0 (based upon
Makefile contents; it's still odd to see the 1.4 Windows release)
* Provide LZ4 as a shared library
- Remove lz4-automake.diff (no longer deemed necessary)
- Add lz4-use-shlib.diff
* Mon Nov 25 2013 dsterba@suse.com
- update to svn 108, set version to 1.4 (current windows release)
- added manpage
- minor code updates
* Tue Sep 3 2013 jengelh@inai.de
- Update to new snapshot svn102; set version as 1.3.3 in accordance
with latest Windows releases.
* Add lz4-killdate.diff (kill the ungodly __DATE__s)
* Thu Feb 21 2013 jengelh@inai.de
- I hate %%makeinstall (it fails all the SLES builds), kill it!
* Sat Mar 17 2012 jengelh@medozas.de
- Initial package for build.opensuse.org