##----------------------------------------------------------------------------- ## fli4l __FLI4LVER__ - configuration for package "freifunk" ## ## P L E A S E R E A D T H E D O C U M E N T A T I O N ! ## ## B I T T E U N B E D I N G T D I E D O K U M E N T A T I O N L E S E N ! ## ##----------------------------------------------------------------------------- ## Creation: 26.02.2006 Uli Wachtel ## Last Update: $Id$ ## ## Copyright (c) 2001-2016 - Ulrich Wachtel, fli4l-Team ## ## Homepage: freifunk.wachtelnet.de ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ##----------------------------------------------------------------------------- #------------------------------------------------------------------------------ # General settings: #------------------------------------------------------------------------------ #OPT_FREIFUNK='no' # install FREIFUNK package: yes or no #OPT_OLSRD='no' # activate OSLR Daemon: yes or no #------------------------------------------------------------------------------ # General settings for OLSRD #------------------------------------------------------------------------------ FREIFUNK_DEBUGLEVEL='' # DebugLevel [1-9] (Defaults to 0) # If set to 0 the daemon runs in background FREIFUNK_IPVERSION='' # IpVersion [4|6] (Defaults to 4) FREIFUNK_ALLOWNOINT='' # AllowNoInt [yes|no] (Default = yes) # Should olsrd keep on running even if there are # no interfaces available? This is a good idea # for a PCMCIA/USB hotswap environment. FREIFUNK_POLLRATE='' # Polling rate in seconds (float). # Default value 0.05 sec FREIFUNK_TCREDUNDACY='' # TC redundancy - Specifies how much # neighbor info should be sent in TC messages # Possible values are: # 0 - only send MPR selectors # 1 - send MPR selectors and MPRs # 2 - send all neighbors # Default value is 2 FREIFUNK_NATTHRESHOLD='0.9' # Nat- ThresHold FREIFUNK_MPRCOVERAGE='' # MPR coverage (Default value is 7) # Specifies how many MPRs a node should # try select to reach every 2 hop neighbor FREIFUNK_LINKQUALITYFISHEYE='' # Fisheye mechanism for TC messages (0=off, 1=on) # Default value is 1 FREIFUNK_LINK_QUALITY_LEVEL='' # Link quality level (Defaults to 2) # 0 = do not use link quality # 1 = use link quality for MPR selection # 2 = use link quality for MPR selection and routing FREIFUNK_LINKQUALITYWINSIZE='' # Link quality window size (Defaults to 100) FREIFUNK_DIJKSTRALIMIT='0 9.0' # LinkQualityDijkstraLimit optimization # empty or "0 9.0" (if empty then no # LinkQualityDijkstraLimit optimization) FREIFUNK_WILLINGNESS='' # OLSRD Willingness (Defaults to 3) FREIFUNK_USE_HYSTERESIS='no' # Wether to use hysteresis or not. # Hysteresis adds more robustness to the # link sensing but delays neighbor registration. # Recommended value is 'no' # Do not use hysteresis with ETX! FREIFUNK_HYSTERESIS_SCALING='0.50' # Hysteresis parameters FREIFUNK_HYSTERESIS_THRHIGH='0.80' # Do not alter these unless you know FREIFUNK_HYSTERESIS_THRLOW='0.30' # what you are doing! # Set to auto by default. Allowed # values are floating point values # in the interval 0,1 # THR_LOW must always be lower than # THR_HIGH. # Recommended values: # HystScaling = 0.50 # HystThrHigh = 0.80 # HystThrLow = 0.30 #------------------------------------------------------------------------------ # Ipc Connect parameters #------------------------------------------------------------------------------ FREIFUNK_IPC_MAX_CONNECTIONS='' # Determines how many simultaneously # IPC connections will be allowed. # Setting this to 0 disables IPC. # Default value is 0. FREIFUNK_IPC_HOST_N='0' # By default only 127.0.0.1 is allowed # to connect. Here allowed hosts can be added FREIFUNK_IPC_HOST_1='192.168.250.4' FREIFUNK_IPC_HOST_2='192.168.0.4' FREIFUNK_IPC_NET_N='0' # You can also specify entire net-ranges that # are allowed to connect. # Multiple entries are allowed FREIFUNK_IPC_NET_1='192.168.250.0:255.255.255.0' FREIFUNK_IPC_NET_2='192.168.1.0:255.255.255.0' #------------------------------------------------------------------------------ # OLSRD interface parameter #------------------------------------------------------------------------------ #------------------------------------------------------------------------------ # NOTE: FREIFUNK_INTERFACE_%_FRAG can only have the value 512 or empty. # (empty means no fragmentation) TXPOWER value is dependent on the used hardware. # It is given in mW and is a numeric value. # # NOTE: BSSID can only set with MADWIFI driver. So it is recommended to use that driver. #------------------------------------------------------------------------------ FREIFUNK_INTERFACE_N='1' FREIFUNK_INTERFACE_1='wlan0' FREIFUNK_INTERFACE_1_BSSID='02:CA:FF:EE:BA:BE' FREIFUNK_INTERFACE_1_RTS='250' FREIFUNK_INTERFACE_1_FRAG='' FREIFUNK_INTERFACE_1_TXPOWER='' FREIFUNK_INTERFACE_2='eth2' FREIFUNK_INTERFACE_2_BSSID='02:CA:FF:EE:BA:BE' FREIFUNK_INTERFACE_2_RTS='250' FREIFUNK_INTERFACE_2_FRAG='512' FREIFUNK_INTERFACE_2_TXPOWER='' FREIFUNK_HELLO_INTERVAL='' # Hello interval in seconds(float) (Default = 6.0) FREIFUNK_HELLO_VALIDITY_TIME='' # HELLO validity time (Default = 108.0) FREIFUNK_TC_INTERVAL='' # TC interval in seconds(float) (Default = 4.0) FREIFUNK_TC_VALIDITY_TIME='' # TC validity time (Default = 324.0) FREIFUNK_MID_INTERVAL='' # MID interval in seconds(float) (Default = 18.0) FREIFUNK_MID_VALIDITY_TIME='' # MID validity time (Default value is 324.0) FREIFUNK_HNA_INTERVAL='' # HNA interval in seconds(float) (Default = 18.0) FREIFUNK_HNA_VALIDITY_TIME='' # HNA validity time (Default value is 108.0) FREIFUNK_LINK_QUALITY_MULT_N='0' # LinkQualityMult - a special optimazion ... FREIFUNK_LINK_QUALITY_MULT_1_IPADDR='104.15.15.33' # If 0 then this optimazion is not used FREIFUNK_LINK_QUALITY_MULT_1_QUALITY='0.5' # Default value for the quality is 0.5 #------------------------------------------------------------------------------ # HNA- routes IP V4 #------------------------------------------------------------------------------ # Use 0.0.0.0:0.0.0.0 if you are a HNA yourselve # and if you are routing the traffic into the internet! FREIFUNK_HNA4_ROUTE_N='0' FREIFUNK_HNA4_ROUTE_1='192.168.250.1:255.255.255.0' FREIFUNK_HNA4_ROUTE_2='192.168.1.1:255.255.255.0' #------------------------------------------------------------------------------ # FREIFUNK- latitude and longitude for the MAP and NS #------------------------------------------------------------------------------ FREIFUNK_LAT='52.59618566678173' # Latitude of the node (found in the Google MAP) FREIFUNK_LON='13.458101749420166' # longitude of the node #------------------------------------------------------------------------------ # FREIFUNK-BSSID-Hack # This hack can be used for bad cards losing the BSSID # (Some but not all atheros cards) #------------------------------------------------------------------------------ #OPT_FREIFUNK_BSSIDHACK='no' #------------------------------------------------------------------------------ # FREIFUNK User Interface #------------------------------------------------------------------------------ #------------------------------------------------------------------------------ # Activate this if you would like to have a public GUI on port 80 # on the wireless interface. OPT_FREIFUNK_TXTINFO is also used by this GUI. # It should be activated on port 2006 if you would like to display OLSR status # or if you are using the google map!!! #------------------------------------------------------------------------------ #OPT_FREIFUNK_GUI='no' # Activation of the GUI #OPT_FREIFUNK_OLSRDGUI='no' # Activation of the OLSRD-GUI FREIFUNK_GUI_NICKNAME='Max' # Nickname of the contact person FREIFUNK_GUI_NAME='Max Mustermann' # name of the contact person FREIFUNK_GUI_EMAIL='Max@Mustermann.de' # Mail address of the contact person FREIFUNK_GUI_FONE='030343434' # Phone number of the contact person # (without spaces and without "-" or "+") FREIFUNK_GUI_LOCATION='Berlin' # Location of the node FREIFUNK_GUI_NOTICE='104.00.00.00' # Some notes FREIFUNK_GUI_MAPSERVER='http://www.layereight.de/freifunkmap.php' # MAP server FREIFUNK_GUI_MAPINTERVAL='hourly' # Update- interval for the MAP- server # valid values: minute, hourly, daily, monthly FREIFUNK_GUI_MAPIP='104.15.15.15' # Displayed IP address on the MAP #------------------------------------------------------------------------------ # Following variables modify the displayed GUI (customization) #------------------------------------------------------------------------------ # HOMEPAGE FREIFUNK_GUI_SHOW_DEFTEXTTOP='yes' # Show the upper default text on the homepage FREIFUNK_GUI_SHOW_DEFTEXTDOWN='yes' # Show the default text below on the homepage FREIFUNK_GUI_SHOW_DEFPIC='yes' # Show the default picture on the homepage FREIFUNK_GUI_SHOW_DEFLINKS='yes' # Show the default links on the homepage # OTHER PAGES FREIFUNK_GUI_SHOW_STATUSPAGE='yes' # Show the status page FREIFUNK_GUI_SHOW_CONTACTPAGE='yes' # Show the contact information page FREIFUNK_GUI_SHOW_MAPPAGE='yes' # Show the Google map page FREIFUNK_GUI_SHOW_ROUTING='yes' # Show the routing infos on the status page FREIFUNK_GUI_SHOW_WLANSCAN='yes' # Show the WLAN scan on the status page FREIFUNK_GUI_SHOW_OLSRINFO='yes' # Show the the OLSR INFO on the status page and # on the overview FREIFUNK_GUI_SHOW_BOOTLOG='yes' # Show the bootlog on the status page FREIFUNK_GUI_SHOW_IPNAT='yes' # Show the IPTABLES information on the status page FREIFUNK_GUI_SHOW_INTERFACES='yes' # Show the interfaces on the status page FREIFUNK_GUI_SHOW_CONNECTIONS='yes' # Show the active connections on the status page #------------------------------------------------------------------------------ # Here you can reference to private customized static webpages, # saved in the internet or somewhere on the FLI4L-HD. #------------------------------------------------------------------------------ FREIFUNK_GUI_PAGE_DLURL='http://127.0.0.1/download' # URL of the download directory without any filename, # optional entry if anything has to be modified in GUI by external files. # If this entry is empty the file is present in the local download directory. # http://your.lan.fli4l/download without trailing "/" FREIFUNK_GUI_PAGE_LOCAL='/tmp' # The local download directory (tmp or a HD directory) without trailing "/" FREIFUNK_GUI_PAGE_N='0' # Number of GUI-pages FREIFUNK_GUI_PAGE_1='Status-gb' # Visible name of the link for a customized new page FREIFUNK_GUI_PAGE_1_FILE='cgi-bin-status-gb.cgi' # The filename of the new page file that will be downloaded on startup FREIFUNK_GUI_PAGE_1_ORDER='50' # Order number of the link (range: 50-99) FREIFUNK_GUI_PAGE_1_TARGET='' # Targets: _blank, _self, _parent, _top FREIFUNK_GUI_PAGE_2='Contact-gb' # In this case I have used a link to the FREIFUNK_GUI_PAGE_2_FILE='cgi-bin-contact-gb.cgi' # locally saved english version of the standard files FREIFUNK_GUI_PAGE_2_ORDER='51' FREIFUNK_GUI_PAGE_2_TARGET='' FREIFUNK_GUI_PAGE_3='Map-gb' FREIFUNK_GUI_PAGE_3_FILE='cgi-bin-freifunk-map-gb.cgi' FREIFUNK_GUI_PAGE_3_ORDER='52' FREIFUNK_GUI_PAGE_3_TARGET='' FREIFUNK_GUI_PAGELINK_N='2' # Number of external links FREIFUNK_GUI_PAGELINK_1='Google' # Name of the link FREIFUNK_GUI_PAGELINK_1_URL='http://www.google.de' # Link target for the linked page FREIFUNK_GUI_PAGELINK_1_ORDER='54' # Order number of the link (range: 50-99) FREIFUNK_GUI_PAGELINK_1_TARGET='_blank' # Targets: _blank, _self, _parent, _top FREIFUNK_GUI_PAGELINK_2='fli4l' FREIFUNK_GUI_PAGELINK_2_URL='http://www.fli4l.de' FREIFUNK_GUI_PAGELINK_2_ORDER='55' FREIFUNK_GUI_PAGELINK_2_TARGET='_blank' FREIFUNK_GUI_PIC_FILE='introcustom.jpg' # Reference to a private customized picture on the homepage, FREIFUNK_GUI_PIC_ALT='This is my own picture' # saved in the internet or somewhere on the FLI4L- HD FREIFUNK_GUI_TEXT_BEFORE_FILE='index-before-gb.txt' # Customized text on the homepage before the picture (HTML text) FREIFUNK_GUI_TEXT_AFTER_FILE='index-after-gb.txt' # Customized text on the homepage after the picture (HTML text) FREIFUNK_GUI_LINK_N='1' # Number of additional private link on the homepage FREIFUNK_GUI_LINK_1='Wachtelnet' # Name of the link FREIFUNK_GUI_LINK_1_URL='http://wachtelnet.de' # Link target for the linked page FREIFUNK_GUI_LINK_1_TARGET='_blank' # Targets: _blank, _self, _parent, _top FREIFUNK_GUI_LINK_2='Web FTP' FREIFUNK_GUI_LINK_2_URL='https://ssl.wachtelnet.com/wachtelnet_de/cgi-bin/ftp/ftp.pl/?bp=init' FREIFUNK_GUI_LINK_2_TARGET='_blank' #------------------------------------------------------------------------------ # P L U G I N S #------------------------------------------------------------------------------ #OPT_FREIFUNK_DYNGWFLI4L='no' # OLSRD dyn_gw_fli4l plugin to find out that # the pppoe or internet connection is down. # Switch this on if you are a HNA! # PPPOE and direct internet connections are supported! FREIFUNK_DYNGWFLI4L_PINGMODE='no' # set FREIFUNK_DYNGWFLI4L_PINGMODE to 'yes' # if the HNA is not using pppoe connection to # access the internet. You should set it to 'no' # if this router uses pppoe for the internet access. # pingmode can be used if the router has direct # internet access FREIFUNK_DYNGWFLI4L_HOST_N='2' FREIFUNK_DYNGWFLI4L_HOST_1='google.de' # ping is used to check the active internet connection FREIFUNK_DYNGWFLI4L_HOST_2='fli4l.de' # If one ping is successful then the internet connection is stable FREIFUNK_DYNGWFLI4L_PINGTIME='1' # time in minutes #------------------------------------------------------------------------------ # OSLRD nameservice plugin - This OPT should be activated for the FREIFUNK network! # # Nameservice - A lightweigth hostname resolve plugin. # # Set NS_DNS if you are a HNA to give other stations your address as a name server!!! # # Do not set NS_DNS if you are not a HNA!!! # ----------------------------------------- # # Set NS_ANNOUNCE_DNS if you are a HNA and want to announce the DNS referer server. # If you are not a HNA then the "host-file" parameter is set internally # to /var/run/hosts_olsr and dnsmasq.conf gets an entry "addn-hosts" so # that the DNS server for the local net will get the DNS informations. # NOTE: This version of nameserver plugin is not able to work with spare nameservers. # So we use not the option "resolv-file" and set the resolv nameserver (referer) # manually in the base package to a fixed value. The DNS referer announcement is optional # and so it could be possible that in some networks no nameserver is available. # So we use fixed NS adresses! #------------------------------------------------------------------------------ #OPT_FREIFUNK_NAMESERVER='no' FREIFUNK_NS_ANNOUNCE_DNS='no' FREIFUNK_NS_DNS='104.15.15.15' FREIFUNK_NS_SUFFIX='.olsr' #------------------------------------------------------------------------------ # plugin OPT_FREIFUNK_SECURE # # Secure OLSR plugin - a plugin that adds signature messages to OLSR traffic # # only allowing nodes that posess the correct shared key to be part # of the OLSR routing domain. This solution includes timestamp exchange. # The keyfile must be stored on HD. # This OPT is not necessarry for FREIFUNK #------------------------------------------------------------------------------ #OPT_FREIFUNK_SECURE='no' FREIFUNK_SECURE_KEYFILE='/boot/data/keyfile' #------------------------------------------------------------------------------ # plugin OPT_FREIFUNK_DOTDRAW # # Dot topology information plugin - a plugin that generates dot compliant graph data of the topology. # # The parameter "accept" specifies which host is accepted to view the Topology Information # (currently only one) and is "localhost" by default. The parameter "port" specifies the TCP port. # It was written a small perl script which continously gets the topology information from # olsrd and displays it using the graphviz and imagemagick tools. # Getting a realtime view # First install the following packages on your workstation: # * graphviz # * imagemagick # Then download the script from [WWW] http://meshcube.org/nylon/utils/olsr-topology-view.pl # Now you can start the script with ./olsr-topology-view.pl and view the topology. # Default port is 2004 #------------------------------------------------------------------------------ #OPT_FREIFUNK_DOTDRAW='no' FREIFUNK_DOTDRAW_HOST='192.168.250.4' FREIFUNK_DOTDRAW_PORT='2004' #------------------------------------------------------------------------------ # plugin OPT_FREIFUNK_PGRAPH #------------------------------------------------------------------------------ #OPT_FREIFUNK_PGRAPH='no' #------------------------------------------------------------------------------ # iwpriv Commands #------------------------------------------------------------------------------ # mode 2 can be used with the madwifi driver to lock the mode to 11b only FREIFUNK_IWPRIV_N='0' FREIFUNK_IWPRIV_1_INTERFACE='eth1' FREIFUNK_IWPRIV_1_COMMAND='mode 2' FREIFUNK_IWPRIV_2_INTERFACE='eth1' FREIFUNK_IWPRIV_2_COMMAND=''