#!/bin/sh
#----------------------------------------------------------------------------
# /etc/rc.d/fwrules-helper-ipv6                                  __FLI4LVER__
# helper functions for packet filter rules
#
# Creation:     2003-07-05 jw5
# Last Update:  $Id$
#----------------------------------------------------------------------------

# include IPv6 helper functions (especially translate_ip6_net)
. /etc/rc.d/base-helper.ipv6

: ${IP6TABLES:=sbin_ip6tables}
: ${fwh_state6:=/var/run/fwrules-helper.state.ipv6}
: ${tmpl_dir6:=/etc/fwrules.tmpl}
: ${ext_dir6:=/etc/rc.d}

fw_tmp6=/tmp/fwrules-helper.$$
ip6tables_dynrules=/var/run/ip6tables.dynrules
ip6tables_dynrules_idx=/var/run/ip6tables.dynrules.next
ip6tables_rules=/var/run/ip6tables.rules

dummy_rule6="::1 !::1 ACCEPT"
create_next_dynrule6()
{
    phidx=$(cat $ip6tables_dynrules_idx)
    echo $((phidx+1)) > $ip6tables_dynrules_idx
    dummy_comment="(PLACEHOLDER:$phidx)"
    comment="$comment $dummy_comment"
    cat <<-EOF > $ip6tables_dynrules/$phidx.rule
dyn_ips="$dyn_ips"
table=$orig_table
chain=$orig_chain
rule="$full_rule"
comment="$comment"
dummy_rule="$dummy_rule6"
dummy_comment="$dummy_comment"
EOF
}

# $1 = table
# $2 = chain
get_next_rule_index6()
{
    table=$1
    chain=$2
    file=$ip6tables_rules/$table/$chain.next
    if [ ! -f $file ]
    then
        echo 1
    else
        echo $(($(cat $file)+1))
    fi
}

ip6tables_rules_added=0
reset_rules_added6 ()
{
    ip6tables_rules_added=0
}
get_rules_added6 ()
{
    eval $1=$ip6tables_rules_added
}
set_rules_added6 ()
{
    ip6tables_rules_added=$1
}

sbin_ip6tables ()
{
    if ! /sbin/ip6tables "$@" > $fw_tmp6 2>&1
    then
        log_error "Error executing ip6tables $@"
        log_error < $fw_tmp6
        rc=1
    else
        ip6tables_rules_added=`expr $ip6tables_rules_added + 1`
        rc=0
    fi
    rm -f $fw_tmp6
    [ "$op" = R ] && op=I
    [ "$op" = I ] && position=$((position+1))
    return $rc
}

[ "$IPV6_NET_N" ] || . /var/run/ip6_net.conf

# read extensions
for i in $ext_dir6/fwrules-*.ext.ipv6
do
    if [ -f $i ]
    then
        if sh -c ". $i" > $fw_tmp6 2>&1
        then
            . $i
          else
            log_error "Error parsing extension $i, rules with this extension in them will fail."
            log_error < $fw_tmp6
        fi
        rm -f $fw_tmp6
    fi
done

assert_empty6 ()
{
    case x$2 in
        x) ;;
        *) set_error "$1: to many subexpressions after translation" ;;
    esac
}

get_limit6()
{
    limit=
    case x"$1" in
            x | xnone)  ;;
        *)  set -- `echo $1 | sed -e 's/:/ /'`
            case x$2 in
                x) limit="-m limit --limit $1" ;;
                *) limit="-m limit --limit $1 --limit-burst $2" ;;
            esac
            ;;
    esac
}

# mangle_params6 param option
#     - replace ':' with ' ', '-' with ':'
mangle_params6 ()
{
    echo $1 | sed -e "s/:/ /g;s/\([0-9]\+\)-\([0-9]\+\)/\1:\2/g;"
}

do6_recent_param ()
{
    eval `echo $1 | sed -e 's/^\([a-z]*\)=\(.*\)/recent_tok=\1;recent_val=\2/'`
    recent_opt="$recent_opt --$recent_tok $recent_val"
}

do6_recent ()
{
    recent_opt=
    set -- `echo $1 | sed -e 's/,/ /g'`
    while [ "$1" ]; do
        case $1 in
            \!*) recent_param=`echo $1 | sed -e 's/^!//'`
                     recent_neg='!'
             ;;
                *)   recent_param="$1"
                     recent_neg=
             ;;
            esac
        case $recent_param in
            name=* | seconds=* | hitcount=*)
                do6_recent_param $recent_param
            ;;
            set | update | rcheck | remove)
                recent_opt="$recent_opt $recent_neg --$recent_param"
            ;;
            rttl | rsource | rdest)
                recent_opt="$recent_opt --$recent_param"
            ;;
            *)
                set_error "recent: unknown option $recent_param"
            ;;
        esac
        shift
    done
    match_opt="$match_opt -m recent $recent_opt"
}

# mangle_ip_params6 param option
#     in:  ip:port, ip or port[-range]
#     out: ip, ip_neg_opt; port, port_neg_opt,  tcp_udp_needed
#     replaces '-' with ':' if $2 is empty
#     FQDNs are mapped to ipsets instead to IP addresses if $3 is empty
mangle_ip_params6 ()
{
    param=$1
    keepslash=$2
    nomap=$3
    case $param in
        \[*\]:*)
            set -- `echo $param | sed -e 's/\[//;s/]:/ /'`
            ip=$1
            port=$2
            tcp_udp_needed='yes'
            ;;
        \[*\])
            set -- `echo $param | sed -e 's/\[//;s/]//'`
            ip=$1
            port=''
            ;;
        *)
            if echo $param | grep -q '^[-,0-9]\+$'
            then
                ip=::/0
                port=$param
                tcp_udp_needed='yes'
            else
                ip=$param
                port=''
            fi
            ;;
    esac

    get_negation6 $ip
    ip=$param
    ip_neg_opt="$neg_opt"

    get_negation6 $port
    port=$param
    port_neg_opt="$neg_opt"

    eval $(grep "^\(OPT_DNS\|DNS_SUPPORT_IPV6\)=" /etc/rc.cfg)
    if [ ! "$nomap" -a "${ip#@}" != "$ip" -a "$OPT_DNS" = "yes" -a "$DNS_SUPPORT_IPV6" = "yes" ] &&
            ! lookup_name_ipv6 "${ip#@}"
    then
        create_next_ipset
        res="${res}6"
    else
        if can_translate_ip6_net $ip || [ "${ip#@}" != "$ip" ]
        then
            translate_ip6_net $ip || set_error
            normalize_network $res
            ip=$res
            [ -n "$potentially_dynamic" ] && dynamic=1
        else
            dyn_ips="$dyn_ips $ip"
            dynamic=1
        fi
    fi

    [ "$port" -a ! "$keepslash" ] && port="`echo $port | sed -e 's/-/:/'`"
}

# get_negation6 param
#     - removes '!' from param and sets neg_opt accordingly
get_negation6 ()
{
    case $1 in
        !*)
            param=`echo $1 | sed -e 's/^!//g'`
            neg_opt='! '
            ;;
        *)
            param=$1
            neg_opt=''
            ;;
    esac
}
#
# default matches
#
recent6_p=yes
prot6_p=yes
state6_p=yes
length6_p=yes
limit6_p=yes
mark6_p=yes
if6_p=yes
mac6_p=yes

# do6_something handle "something:" statments
#
# do6_prot param opt
#     - handles "prot:" statements
do6_prot ()
{
    set -- `mangle_params6 $1`
    proto=$1
    opt=$2
    case $proto in
       icmpv6) assert_empty6 "do6_prot $*" "$3" ;;
       *)    assert_empty6 "do6_prot $*" "$2" ;;
    esac
    get_negation6 $proto
    case $param in
        any) ;;
        icmpv6)
            prot_opt="${neg_opt}-p icmpv6"
            case x$opt in
                x) ;;
                 *)
                    get_negation6 $opt
                    prot_opt="$prot_opt ${neg_opt}--icmpv6-type $param"
                    ;;
            esac
            ;;
        *)
            prot_opt="${neg_opt}-p $param" ;;
    esac
}

do6_mark ()
{
    get_negation6 $1
    match_opt="$match_opt -m mark ${neg_opt}--mark $param"
}

do6_state ()
{
    get_negation6 $1
    match_opt="$match_opt -m conntrack ${neg_opt}--ctstate $param"
}

do6_length ()
{
    param=`mangle_params6 $1`
    get_negation6 $param
    match_opt="$match_opt -m length ${neg_opt}--length $param"
}

do6_limit ()
{
    get_limit6 $1
    match_opt="$match_opt $limit"
}

do6_mac ()
{
    get_negation6 $1
    match_opt="$match_opt -m mac ${neg_opt}--mac-source $param"
}

do6_if_opt ()
{
    translate_ip6_dev $3 real_if 1
    if is_error; then
        real_if=lo
        log_error "setting interface to 'lo'"
    fi
    [ "$real_if" != "any" ] && if_opt="$if_opt $1 $2 $real_if"
}

do6_if ()
{
    set -- `mangle_params6 $1`
    assert_empty6 "do6_if $*" "$3"
    get_negation6 $1
    if_in=$param
    if_in_negopt="$neg_opt"
    get_negation6 $2
    if_out=$param
    if_out_negopt="$neg_opt"

    do6_if_opt "$if_in_negopt" -i $if_in
    do6_if_opt "$if_out_negopt" -o $if_out
}

do6_default ()
{
    rule="$*"
    full_rule_suffix=

    case "$rule" in
        *BIDIRECTIONAL*)
            rule=`echo $rule | sed -e 's#\(.*\)BIDIRECTIONAL\(.*\)#\1\2#'`
            bidirectional='yes'
            full_rule_suffix="$full_rule_suffix BIDIRECTIONAL"
            ;;
    esac

    case "$rule" in
        *DROP*|*REJECT*|*ACCEPT*|*SNAT*|*DNAT*|*NETMAP*|*MASQUERADE*|*REDIRECT*|*HELPER*)
            case "$rule" in
            *NOLOG*)
                rule=`echo $rule | sed -e 's#\(.*\)NOLOG[^[:space:]]*\(.*\)#\1\2#'`
                full_rule_suffix="$full_rule_suffix NOLOG"
                log_opt='no'
                ;;
            *LOG*)
                log_prefix="`echo $rule | sed -e 's#.*LOG:\?\([^[:space:]]*\).*#\1#'`"
                    log_opt='yes'
                    rule=`echo $rule | sed -e 's#\(.*\)LOG[^[:space:]]*\(.*\)#\1\2#'`
                    full_rule_suffix="$full_rule_suffix LOG"
                    [ -n "$log_prefix" ] && full_rule_suffix="${full_rule_suffix}:$log_prefix"
                ;;
            esac
            ;;
    esac

    set -- $rule

    # rewrite arguments
    case "$#" in
        3)
            src=$1
            dst=$2
            action=$3
            ;;
        2)
            case $1 in
                \[*\]:* | dynamic* | \[dynamic\]*)
                    dst=$1
                    action=$2
                    ;;
                \[*\] | \[*\]/* | any | IPV6_* | ipv6_* | @* )
                    src=$1
                    action=$2
                    ;;
                *)
                    dst=$1
                    action=$2
                    ;;
            esac
            ;;
        1)
            action=$1
            ;;
        *)
            set_error "*** Error in rule $rule ***"
            ;;
    esac

    mangle_ip_params6 $src "" nomap
    if is_error
    then
        set_error "$rule: error while processing source '$src'"
        return 1
    fi

    src_unmapped=$src
    src_unmapped_neg=$src_neg
    case "$ip" in
    @*)
        match_opt="$match_opt -m set ${ip_neg_opt}--match-set $res src"
        src=::/0
        src_neg=
        ;;
    *)
        src="$ip"
        src_neg="$ip_neg_opt"
        ;;
    esac

    case "x$port" in
         x) ;;
         *,*) src_port_opt="-m multiport ${port_neg_opt} --source-ports $port" ;;
         *) src_port_opt="${port_neg_opt} --source-port $port" ;;
    esac

    if [ -z "$in_template" ]
    then
        full_src="$ip_neg_opt"
        if [ -n "$port" ]
        then
            full_src="$full_src[$ip]:$(echo $port | sed 's/:/-/')"
        else
            full_src="$full_src$ip"
        fi
    fi

    mangle_ip_params6 $dst
    if is_error
    then
        set_error "$rule: error while processing destination '$dst'"
        return 1
    fi

    dst_unmapped=$dst
    dst_unmapped_neg=$dst_neg
    case "$ip" in
    @*)
        match_opt="$match_opt -m set ${ip_neg_opt}--match-set $res dst"
        dst=::/0
        dst_neg=
        ;;
    *)
        dst="$ip"
        dst_neg="$ip_neg_opt"
        ;;
    esac

    [ -n "$port" ] && dport=$port
    case "x$port" in
         x) ;;
         *,*) dst_port_opt="-m multiport ${port_neg_opt} --destination-ports $port" ;;
         *)   dst_port_opt="${port_neg_opt} --destination-port $port" ;;
    esac

    if [ -z "$in_template" ]
    then
        full_dst="$ip_neg_opt"
        if [ -n "$dport" ]
        then
            full_dst="$full_dst[$ip]:$(echo $dport | sed 's/:/-/')"
        else
            full_dst="$full_dst$ip"
        fi

        full_rule="$full_rule $full_src $full_dst $action $full_rule_suffix"
    fi

    action_opt=
    case $action in
        NONE) ;;
        DROP)
            case x$log_prefix in
                x) action_opt="$drop";;
                *) action_opt="$action";;
            esac
            ;;
        REJECT)
            case x$log_prefix in
                x) action_opt="$reject";;
                *) action_opt="$action";;
            esac
            ;;
        MARK:*)
            val=`echo $action | sed -e 's/MARK://'`
            action_opt="MARK --set-mark $val"
            ;;
        MASQUERADE:*)
            mangle_ip_params6 `echo $action | sed -e 's/MASQUERADE://'` keepslash nomap
            action_opt="MASQUERADE"
            [ "$port" ] && action_opt="$action_opt --to-ports $port"
            ;;
        SNAT:*)
            mangle_ip_params6 `echo $action | sed -e 's/SNAT://'` keepslash nomap
            action_opt="SNAT --to-source [$ip]"
            [ "$port" ] && action_opt="$action_opt:$port"
            ;;
        NETMAP:*)
            mangle_ip_params6 `echo $action | sed -e 's/NETMAP://'` keepslash nomap
            action_opt="NETMAP --to ${ip}"
            ;;
        DNAT:*)
            mangle_ip_params6 `echo $action | sed -e 's/DNAT://'` keepslash nomap
            action_opt="DNAT --to-dest [$ip]"
            [ "$port" ] && action_opt="$action_opt:$port"
            ;;
        REDIRECT:*)
            mangle_ip_params6 `echo $action | sed -e 's/REDIRECT://'` keepslash nomap
            : ${port:=$dport}
            action_opt="REDIRECT --to-ports $port"
            ;;
        HELPER:*)
            helper=`echo $action | sed -e 's/HELPER://'`
            action_opt="CT --helper $helper"
            if ! do_modprobe_if_exists kernel/net/netfilter nf_nat_$helper ||
               ! do_modprobe_if_exists kernel/net/ipv6/netfilter nf_nat_$helper
            then
                log_error "NAT helper module for protocol $helper failed to load, NAT traversal will not work"
            fi
            ;;
        LOG:*)
            log_prefix="`echo $action | sed -e 's/LOG://'`"
            action_opt=LOG
            ;;
        *)
            action_opt="$action"
            ;;
    esac
}


execute_log_statement6 ()
{
    case x$log_prefix in
        x) $IP6TABLES -t $table -$op $chain $position $1 -m comment --comment "$comment" -j LOG $log_level ;;
        *) $IP6TABLES -t $table -$op $chain $position $1 -m comment --comment "$comment" -j LOG --log-prefix "$log_prefix " $log_level ;;
    esac
}

# prot:(tcp|udp|gre|[0-9]{1,3}) if:in:out state:RELATED,ESTABLISHED,NEW,INVALID src[:port-port] dest[:port-port] accept|reject|drop

really_execute_iptables6 ()
{
    do_action=$2
    do_log=''
    case $do_action in
        *drp-log | *rej-log)
            if [ "$log_opt" = 'no' ]
            then
                do_action=`echo $do_action | sed -e 's#^\(.*\)-log#\1#'`
            fi
            ;;
        *drp | *rej)
            if [ "$log_opt" = 'yes' ]
            then
                do_action=${do_action}-log
            fi
            ;;
        *)
            do_log="$log_opt"
            ;;
        esac
        set -f
        case "$do_log" in
            yes)
                execute_log_statement6 "$1"
                $IP6TABLES -t $table -$op $chain $position $1 -m comment --comment "$comment" -j $do_action
                ;;
            *)
                case $do_action in
                    LOG) execute_log_statement6 "$1" ;;
                    *)   $IP6TABLES -t $table -$op $chain $position $1 -m comment --comment "$comment" -j $do_action ;;
                esac
                ;;
        esac
        set +f
}

exec_iptables6 ()
{
    table=$1
    chain=$2
    case $op in
        I|R) ;;
        *) position= ;;
    esac
    opts="$if_opt $match_opt ${src_neg}-s $src $src_port_opt ${dst_neg}-d $dst $dst_port_opt"
    if [ -z "$fw_rule_error" ]
    then
        if [ -z "$tcp_udp_needed" -o "$prot_opt" ]
        then
            really_execute_iptables6 "$prot_opt $opts" "$action_opt"
        else
            really_execute_iptables6 "-p tcp $opts"  "$action_opt"
            really_execute_iptables6 "-p udp $opts"  "$action_opt"
        fi
    fi
}

init_options6 ()
{
    table=$1
    chain=$2
    op=$3
    comment=$4
    if_opt=''
    match_opt=''
    prot_opt=''
    src='any'
    src_neg=''
    src_port_opt=''
    src_unmapped='any'
    src_unmapped_neg=''
    dst='any'
    dst_neg=''
    dst_port_opt=''
    dst_unmapped='any'
    dst_unmapped_neg=''
    dport=
    action_opt=''
    tcp_udp_needed=''
    bidirectional=''
    log_opt=''
    log_prefix=''
    log_target='LOG'
    fw_rule_error=''
    dyn_ips=
    dynamic=
    full_rule=
    if [ -f $fwh_state6.$chain ]
    then
        . $fwh_state6.$chain
    else
        drop=DROP
        reject=REJECT
    fi
}

parse_rule6 ()
{
    parse_rule_param="$1"

    while true
    do
        set -- $parse_rule_param
        local first="$1"
        eval `echo $1 | sed -e 's/^[[:space:]]*/#/;s/^#\([a-z][[:alnum:]]\+\):\([^[:space:]]*\).*/present=\$\16_p;ext=\1;val=\2/;s/^#.*/ext=;/;s/.*ext=any.*/ext=/'`
        case x$ext in
            x)
                do6_default $*
                return $?
                ;;
            *)
                shift
                parse_rule_param="$*"
                case $present in
                    yes)
                        full_rule="$full_rule $ext:$val"
                        eval do6_$ext $val
                        ;;
                    *)
                        if echo "$ext" | grep -q "^[a-fA-F0-9]\+$"
                        then
                            # assuming IPv6 address
                            do6_default $first $*
                            return $?
                        else
                            log_error "invalid match $ext:"
                        fi
                        ;;
                esac
                ;;
        esac
    done
}

exec_rule6 ()
{
    if [ -n "$dynamic" ] && ! echo "$comment" | grep -q "(PLACEHOLDER:[0-9]\+)$"
    then
        case $orig_op in
        A|I|R)
            create_next_dynrule6
            ;;
        *)
            ;;
        esac
    fi

    if [ -n "$dyn_ips" ]
    then
        save_full_rule="$full_rule"
        do_rule6 "$orig_table" "$orig_chain" "$orig_op" "$dummy_rule6" "$position" exec_rule6 "$comment"
        rc=$?
        full_rule="$save_full_rule"
        return $rc
    else
        $pre_exec
        if [ "$bidirectional" = 'yes' ]
        then
            exec_iptables6 $table $chain

            swp=$src
            swp_neg=$src_neg
            swp_port_opt=$src_port_opt
            src=$dst
            src_neg=$dst_neg
            src_port_opt=$(echo $dst_port_opt | sed 's/--destination-port/--source-port/')
            dst=$swp
            dst_neg=$swp_neg
            dst_port_opt=$(echo $swp_port_opt | sed 's/--source-port/--destination-port/')
            if_opt=`echo $if_opt | sed -e 's#-i #-x #' -e 's#-o #-i #' -e 's#-x #-o #'`
        fi

        exec_iptables6 $table $chain
    fi
}

exec_access_rule6()
{
    rule="$full_rule"
    new_rule=

    # let extensions unchanged
    while true
    do
        set -- $rule
        eval `echo $1 | sed -e 's/^[[:space:]]*/#/;s/^#\([a-z][[:alnum:]]\+\):\([^[:space:]]*\).*/present=\$\1_p;ext=\1;val=\2/;s/^#.*/ext=;/;s/.*ext=any.*/ext=/'`
        case x$ext in
            x)
                break
                ;;
            *)
                new_rule="$new_rule $1"
                shift
                rule="$*"
                ;;
        esac
    done

    # extract source, destination, actions
    set -- $rule
    src=$1
    dst=$2
    action=$3
    shift 3
    rule_tail="$*"

    # split destination into address and port (if available)
    set -- $(echo $dst | sed -e 's/\[//;s/]:/ /;s/]//')
    dst="[$1]"
    dport=$2

    # override parts of destination, according to PREROUTING rule
    case $action in
        DNAT:*)
            chain=PORTFWACCESS
            set -- $(echo $action | sed 's/^DNAT://;s/\[//;s/]:/ /;s/]//')
            dst="[$1]"
            [ -n "$2" ] && dport=$2
        ;;
        REDIRECT:*)
            chain=PORTREDIRACCESS
            set -- $(echo $action | sed 's/^REDIRECT://')
            dport=$1
        ;;
        *)
            # no access rules for targets other then DNAT or REDIRECT
            return ;;
    esac

    # combine parts to form the new FORWARD rule
    new_rule="$new_rule $src $dst"
    [ -n "$dport" ] && new_rule="$new_rule:$dport"
    new_rule="$new_rule ACCEPT $rule_tail"

    # add rule to the FORWARD chain
    do_rule6 filter $chain "$orig_op" "$new_rule" "$position" exec_rule6 "$comment"
}

exec_prerouting_rule6()
{
    exec_rule6 || return $?
    get_rules_added6 saved_rules_added
    exec_access_rule6
    local rc=$?
    set_rules_added6 $saved_rules_added
    return $rc
}

read_tmpl ()
{
    local tmpl_name=$1
    {
        if [ -e $tmpl_dir6/$tmpl_name ]
        then
            cat $tmpl_dir6/$tmpl_name
        else
            tmpl_name=$(echo $tmpl_name | tr "A-Z" "a-z")
            sed -n "s/^$tmpl_name[[:space:]]\+//p" $tmpl_dir6/templates 
        fi
    } | sed -e "s/#.*//;/^[[:space:]]*$/d"
}

# do_rule6 table chain operation rule position method comment
do_rule6 ()
{
    case x$FWRULES6_DO_DEBUG in x) set +x; ;; esac
    local orig_table=$1
    local orig_chain=$2
    local orig_op=$3
    local orig_rule="$4"
    local full_orig_rule="$4"
    local position=$5
    local method="$6"
    local orig_comment="$7"

    : ${method:=exec_rule6}
    : ${orig_comment:="$orig_rule"}

    reset_rules_added6

    case "$orig_rule" in
        *tmpl:*)
            eval set -- `echo "$orig_rule" | sed -e "s#\(.*\)[[:space:]:]*tmpl:\([^[:space:]]*\)\(.*\)#'\1' '\2' '\3'#"`
            rule_head="$1"
            rule_tail="$3"
            orig_rule="$rule_head $rule_tail"
            local orig_tmpl_name=$2
            local orig_position=$position
            : ${orig_position:=1}
            tmpl_rules="`read_tmpl $2`"

            if [ -n "$tmpl_rules" ]
            then
                while read tmpl_rule
                do
                    init_options6 $orig_table $orig_chain $orig_op "$orig_comment"
                    in_template=yes
                    parse_rule6 "$tmpl_rule DROP"
                    in_template=
                    parse_rule6 "$orig_rule"
                    if ! is_error
                    then
                        if [ -n "$bidirectional" ]
                        then
                            set_error "$full_orig_rule: using templates and BIDIRECTIONAL simultaneously is not allowed"
                        else
                            $method
                        fi
                    fi
                    get_rules_added6 rules_added
                    position=`expr $orig_position + $rules_added`
                done <<EOF
$tmpl_rules
EOF
            else
                set_error "can't find packetfilter template '$orig_tmpl_name'"
            fi

            ;;
        *)
            init_options6 $orig_table $orig_chain $orig_op "$orig_comment"
            parse_rule6 "$orig_rule"
            is_error || $method
    esac
    case x$tmp_debug in xyes) set -x; ;; esac
    case x$debug_active in xyes) set -x; ;; esac
}
# add_rule6 table chain rule comment method
add_rule6 ()
{
    local pf_file=$ip6tables_rules/$1/$2
    local pf_rule="$3"

    do_rule6 $1 $2 A "$3" '' "$5" "$4"
    if is_error
    then
        set_error
    else
        add_rule_to_file
    fi
}

# del_rule6 table chain rule comment method
del_rule6 ()
{
    local pf_file=$ip6tables_rules/$1/$2
    local pf_rule="$3"

    do_rule6 $1 $2 D "$3" '' "$5" "$4"
    if is_error
    then
        set_error
    else
        del_rule_from_file
    fi
}

# ins_rule6 table chain rule position comment method
ins_rule6 ()
{
    local pf_file=$ip6tables_rules/$1/$2
    local pf_rule="$3"

    do_rule6 $1 $2 I "$3" "$4" "$6" "$5"
    if is_error
    then
        set_error
    else
        add_rule_to_file
    fi
}

do_pre_exec6 ()
{
    chain=test-chain
}
do_check_rule6 ()
{
    dcr_res=0
    pre_exec=do_pre_exec6
    base_colecho=true
    base_log_file=/tmp/check_rule6.$$
    cons_boot=yes
    rm -f $base_log_file

    if ! ip6tables -t $1 -L test-chain > /dev/null 2>&1; then
        do_chain6 $1 test-chain N add-test-chain
    fi
    do_rule6 $1 $2 A "$3" '' "$4" "$3"
    if [ -f $base_log_file ]; then
        echo "Invalid rule '$3'"
        cat $base_log_file
        rm -f $base_log_file
        dcr_res=1
    else
        do_rule6 $1 $2 D "$3" '' "$4" "$3"
    fi

    unset pre_exec
    unset base_colecho
    unset base_log_file
    return $dcr_res
}

check_rule6 ()
{
    : ${SCRIPT:=check_rule6}
    do_check_rule6 filter foo "$1" ''
}

# setup_logging6 <yes|no> <chain prefix> <log prefix> <log limits>
#               <rej limits> <udp rej limits> <log level>
setup_logging6 ()
{
    enabled=$1
    chain=$2
    prefix="$3"
    log_limit="$4"
    rej_limit="$5"
    udp_rej_limit="$6"
    log_level=$7
    get_limit6 "$log_limit"
    log_limit="$limit"
    get_limit6 "$rej_limit"
    rej_limit="$limit"
    get_limit6 "$udp_rej_limit"
    udp_rej_limit="$limit"

    case $chain in
        FORWARD)
            drop="fw-drp"
            reject="fw-rej"
            ;;
        INPUT)
            drop="in-drp"
            reject="in-rej"
            ;;
        OUTPUT)
            drop="out-drp"
            reject="out-rej"
            ;;
        *)
            log_error "setup_loggig: unknown chain $chain"
            drop="un-drp"
            reject="un-rej"
            ;;
    esac
    cat <<-EOF > $fwh_state6.$chain
        drop_name=$drop
        reject_name=$reject
EOF
    case x$log_level in
        x) ;;
        *)
            log_level="--log-level $log_level"
            echo "log_level='$log_level'" >> $fwh_state.$chain
            ;;
    esac

    $IP6TABLES -N ${drop}
    $IP6TABLES -N ${drop}-log
    $IP6TABLES -N ${reject}
    $IP6TABLES -N ${reject}-log
    $IP6TABLES -N ${reject}-fin

    $IP6TABLES -A ${drop}-log            $log_limit     -j LOG --log-prefix "${prefix}-drop " $log_level
    $IP6TABLES -A ${drop}-log                           -j DROP
    $IP6TABLES -A ${drop}                               -j DROP

    $IP6TABLES -A ${reject}-log          $log_limit     -j LOG --log-prefix "${prefix}-reject " $log_level
    $IP6TABLES -A ${reject}-log                         -j ${reject}
    $IP6TABLES -A ${reject}       -p udp $udp_rej_limit -j ${reject}-fin
    $IP6TABLES -A ${reject}     ! -p udp $rej_limit     -j ${reject}-fin
    $IP6TABLES -A ${reject}                             -j DROP

    case $reject in
    *in*)
        $IP6TABLES -A ${reject}-fin -p   tcp    -j REJECT --reject-with tcp-reset
        $IP6TABLES -A ${reject}-fin -p   udp    -j REJECT --reject-with port-unreach
        $IP6TABLES -A ${reject}-fin             -j DROP
        ;;
    *)
        $IP6TABLES -A ${reject}-fin ! -p icmpv6 -j REJECT --reject-with icmp6-adm-prohibited
        $IP6TABLES -A ${reject}-fin             -j DROP
        ;;
    esac

    case  $enabled in
        yes)
            drop="${drop}-log"
            reject="${reject}-log"
            ;;
        *)
            drop=DROP
            ;;
    esac
    cat <<-EOF >> $fwh_state6.$chain
        drop=$drop
        reject=$reject
EOF
}

# get log chain names and default drop/reject actions
get_defaults6 ()
{
    . $fwh_state6.$1
}

# close_chain <chain name> <chain policy>
close_chain6 ()
{
    . $fwh_state6.$1

    case "$2" in
        DROP)
            $IP6TABLES -A $1 -j $drop
            ;;
        REJECT)
            $IP6TABLES -A $1 -j $reject
            ;;
        ACCEPT)
            $IP6TABLES -P $1 ACCEPT
        ;;
    esac
}

do_chain6 ()
{
    local table=$1
    local chain=$2
    local op=$3
    local name=$4
    if ! $IP6TABLES -t $table -$op $chain
    then
        log_error "${name}_chain6 $chain failed..."
    fi
}

chain_present6 ()
{
    local table=$2
    : ${table:=filter}
    ip6tables -t $table -L $1 > /dev/null 2>&1
}

nat_chain_present6 ()
{
    chain_present6 $1 nat
}

add_chain6 ()
{
    do_chain6 filter $1 N add
}

add_nat_chain6 ()
{
    do_chain6 nat $1 N add
}

flush_chain6 ()
{
    do_chain6 filter $1 F flush
}

flush_nat_chain6 ()
{
    do_chain6 nat $1 F flush
}

del_chain6 ()
{
    do_chain6 filter $1 X del
}

del_nat_chain6 ()
{
    do_chain6 nat $1 X del
}

set_count6 ()
{
    echo 1 > /var/run/$1_def_end.ipv6
    ip6tables -nL $1  --line-numbers | \
        while read num tail
        do
            case $num in
                [0-9]*)
                    echo `expr $num + 1` > /var/run/$1_def_end.ipv6
                    ;;
            esac
        done
}

get_count6 ()
{
    res=`cat /var/run/$1_def_end.ipv6`
}