#------------------------------------------------------------------------------
# /etc/rc.d/rc002.hwsupp                                           __FLI4LVER__
#
# Creation:     2009-08-07 babel
# Last Update:  $Id$
#------------------------------------------------------------------------------

if [ "$OPT_HWSUPP" = "yes" ]
then
    begin_script HWSUPP "starting hardware support for $HWSUPP_TYPE"
    
    {
        echo "hwsupp_watchdog='$HWSUPP_WATCHDOG'"
        echo "hwsupp_cpufreq='$HWSUPP_CPUFREQ'"
    } > /var/run/hwsupp.conf

    if [ "$HWSUPP_WATCHDOG" = "yes" -a -z "`ps | grep watchdogd | grep -v grep`" ]
    then
        log_info "starting watchdog daemon ..."
        # start watchdog daemon, required modules are loaded via rc001.* scripts
        if [ -c /dev/watchdog ]
        then
            watchdogd -d /dev/watchdog -r 20 -t 1
        else
            if [ -c /dev/geode-watchdog ]
            then
                watchdogd -d /dev/geode-watchdog -r 20 -t 1
            else
                log_error "cannot find watchdog-device"
            fi
        fi
    fi

    # load i2c devices
    if [ 0$HWSUPP_I2C_N -gt 0 ]
    then
        log_info "loading i2c devices..."
        for i in `seq 1 $HWSUPP_I2C_N`
        do
            eval bus=\$HWSUPP_I2C_${i}_BUS
            eval addr=\$HWSUPP_I2C_${i}_ADDRESS
            eval device=\$HWSUPP_I2C_${i}_DEVICE
            if [ -f /sys/bus/i2c/devices/$bus/new_device ]
            then
                echo $device $addr >/sys/bus/i2c/devices/$bus/new_device
            else
                log_error "I2C bus $bus not found"
            fi 
        done 
        sleep 1 # wait a second for i2c devices 
    fi
    
    
    # init leds
    if [ 0$HWSUPP_LED_N -gt 0 ]
    then
        log_info "init LEDs..."
        
        # create led symlinks
        for i in `seq 1 $HWSUPP_LED_N`
        do
            eval device=\$HWSUPP_LED_${i}_DEVICE
            type=`echo $device | cut -d ':' -f 1`
            case $type in
                gpio)
                    gpio=`echo $device | cut -d ':' -f 3`
                    if [ -f /sys/class/leds-gpio-dyn/attach ]
                    then
                        echo $gpio > /sys/class/leds-gpio-dyn/attach
                    else
                        log_error "leds-gpio-dyn driver not loaded"
                    fi
                ;;
                /gpio)
                    gpio=`echo $device | cut -d ':' -f 3`
                    if [ -f /sys/class/leds-gpio-dyn/attach-inv ]
                    then
                        echo $gpio > /sys/class/leds-gpio-dyn/attach-inv
                    else
                        log_error "leds-gpio-dyn driver not loaded"
                    fi
                ;;
            esac
            if [ -d /sys/class/leds/$device ]
            then
                ln -s /sys/class/leds/$device /var/run/hwsuppd/hwsupp-led$i
            else
                log_error "/sys/class/leds/$device not found"
            fi
        done
        
        # load led-trigger modules 
        do_modprobe ledtrig-pattern
        do_modprobe ledtrig-timer
        for i in `seq 1 $HWSUPP_LED_N`
        do
            eval action=\$HWSUPP_LED_${i}
            eval param=\"\$HWSUPP_LED_${i}_PARAM\"
            if [ "$action" = "trigger" ]
            then
                do_modprobe_if_exists kernel/drivers/leds/trigger ledtrig-$param
            fi
        done
        
        # write hwsupp.conf
        {
            echo "hwsupp_type='$HWSUPP_TYPE'"
            echo "hwsupp_led_n='$HWSUPP_LED_N'"
        
            for i in `seq 1 $HWSUPP_LED_N`
            do
                eval action=\$HWSUPP_LED_${i}
                eval param=\$HWSUPP_LED_${i}_PARAM

                echo "hwsupp_led_${i}='$action'"
                echo "hwsupp_led_${i}_param='$param'"
            done
            
            if [ 0$HWSUPP_BOOT_LED -gt 0 ]
            then
                echo "hwsupp_boot_led='$HWSUPP_BOOT_LED'"
            fi
        }  >> /var/run/hwsupp.conf

        for i in `seq 1 $HWSUPP_LED_N`
        do
            eval action=\$HWSUPP_LED_${i}
            eval param=\"\$HWSUPP_LED_${i}_PARAM\"
            
            # init leds
            if [ -d /var/run/hwsuppd/hwsupp-led$i ]
            then
                echo none > /var/run/hwsuppd/hwsupp-led$i/trigger
                echo 0 > /var/run/hwsuppd/hwsupp-led$i/brightness
        
                if [ 0$HWSUPP_BOOT_LED -eq $i ]
                then
                    echo pattern >/var/run/hwsuppd/hwsupp-led$i/trigger
                else
                    case $action in
                        trigger)
                            echo $param >/var/run/hwsuppd/hwsupp-led$i/trigger
                        ;;
                        ready)
                            echo pattern >/var/run/hwsuppd/hwsupp-led$i/trigger
                        ;;
                    esac
                fi
            fi
        done

        . /etc/rc.d/bootled-progress
        bootled_progess 00000003
    fi # init leds
    
    # load cpufreq governors
    if [ "$HWSUPP_CPUFREQ" = "yes" ]
    then
        log_info "loading cpufreq governors..."
        for i in ondemand conservative powersave userspace stats
        do
            if [ -f /lib/modules/${kernel_version}/kernel/drivers/cpufreq/cpufreq_$i.ko ]
            then
                do_modprobe cpufreq_$i
            fi
        done
    fi

    # start sensors with -s to allow settings like "set in0_max 5 * 0.95" to work
    sensors -s 2>&1 > /dev/null

    if [ -c /dev/hw_random -a -x /usr/sbin/rngd  -a -z "`ps | grep rngd | grep -v grep`" ]
    then
        service-restart.sh 5 /usr/sbin/rngd -t 1 -f -r /dev/hw_random >/dev/null 2>&1 &
    fi

   end_script
fi