##----------------------------------------------------------------------------- ## hd.txt - fli4l configuration parameters __FLI4LVER__ ## ## P L E A S E R E A D T H E D O C U M E N T A T I O N , ## S E E R E A D M E . T X T ## ## B I T T E U N B E D I N G T D I E D O K U M E N T A T I O N ## L E S E N , S I E H E R E A D M E . T X T ## ## Creation: 26.06.2001 fm ## Last Update: $Id$ ## ## Copyright (c) 2001-2011 - Frank Meyer, fli4l-Team - team@fli4l.de ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ##----------------------------------------------------------------------------- #------------------------------------------------------------------------------ # Optional package: HD controler drivers # # Driver Bus Description # # ide-hd IDE Hard Disk - NOT IDE-Raid - use Special IDE-Driver # below if not supported by generic driver _additionally_ # sata-hd SATA Hard Disk - supports generic AHCI-SATA Controllers # use special-Driver if not supported by AHCI # _additionally_ # ata-hd ATA Hard Disk - supports generic ATA/IDE Controllers # use special-Driver if not supported by generic Drivers # _additionally_ # usb-hd USB Hard Disk - or Stick - needs opt_usb # pcmcia-hd PCMCIA Hard Disk - or Flash in Adapter - needs # opt_pcmcia. No boot possible from these devices # ide-floppy LS-120 and ATAPI-Zip # scsi-hd SCSI Hard Disk - needed additionally to scsi-driver # to boot from SCSI Hard-Disks # atp870u PCI ACARD 870U/W # aha152x ISA/VLB Adaptec AHA-1510, AHA-1520, AHA-1522, and AHA-2825 # aha1542 ISA Adaptec AHA154x Controller # aic7xxx PCI various aic7xxx based Adaptec SCSI controllers but # *not* AHA2920 # advansys all adapters manufactered by Advansys # buslogic PCI BusLogic MultiMaster and FlashPoint adapters # fdomain PCI Future Domain 16xx SCSI/AHA-2920A # g_ncr5380 ISA generic NCR family of SCSI controllers # initio PCI Initio 91XXU(W) SCSI host adapter # a100u2w PCI Initio INI-A100U2W SCSI host adapter # sym53c8xx_2 PCI All Adapter with Symbios Logic (LSI) Chips 53c8xx # (Kernel 2.4 only) # sym53c8xx PCI All Adapter with Symbios Logic (LSI) Chips 53c8xx # (Kernel 2.6 only) # ncr53c8xx PCI NCR53C8XX family of PCI-SCSI controllers # (Kernel 2.4 only) # sim710 Simple 53c710 SCSI support (Compaq, NCR machines) # (Kernel 2.4 only) # sym53c416 ISA sym53c416 SCSI host adapter # tmscsim PCI Tekram DC390(T) and Am53/79C974 based adapters # ultrastor UltraStor 14F, 24F and 34F SCSI-2 # # Special IDE Controllers (usually not necessary if you only want to boot) # aec62xx PCI ARTOP AEC62xx IDE # alim15x3 PCI ALi 15x3 IDE # amd74xx PCI AMD PCI IDE driver (e.g. ALIX) # atiixp PCI ATI IXP IDE # cmd64x PCI CMD64x IDE # cs5530 PCI Cyrix/NS 5530 IDE # cy82c693 PCI the Cypress CY82C693 IDE # hpt34x PCI Highpoint 34x IDE # hpt366 PCI Highpoint HPT366 IDE # ns87415 PCI NS87415 IDE # opti621 PCI Opti621 IDE # pdc202xx_new PCI Promise PDC20268 and higher # pdc202xx_old PCI older Promise IDE # piix PCI Intel PIIX IDE # rz1000 PCI RZ1000 IDE # sc1200 PCI NS SC1200 IDE # serverworks PCI Serverworks OSB4/CSB5/CSB6 IDE # siimage PCI SiI IDE # sis5513 PCI SIS IDE # slc90e66 PCI SLC90E66 IDE # triflex PCI Compaq Triflex IDE # trm290 PCI Tekram TRM290 IDE # via82cxxx PCI VIA IDE # # Special ATA Controllers (usually not necessary if you only want to boot) # See above IDE-Drivers as this ones may work for the same Hardware # Use together with HD_DRV_x='ata-hd' or 'ata-cd' # # ata_piix PCI Intel PIIX/ICH # pata_acpi PCI ATA in ACPI mode # pata_ali PCI AL # pata_amd PCI AMD and Nvidia # pata_artop PCI ARTOP # pata_atiixp PCI ATI IXP200/300/400 # pata_atp867x PCI Artop/Acard 867x # pata_cmd640 PCI CMD640 # pata_cmd64x PCI CMD64x # pata_cs5520 PCI Cyrix CS5510/5520 # pata_cs5530 PCI Cyrix/NS/AMD 5530 # pata_cs5535 PCI NS/AMD 5530 # pata_cs5536 PCI CS5536 # pata_cypress PCI CY82C693 # pata_efar PCI EFAR PIIX clones # pata_hpt366 PCI Highpoint HPT366/368 # pata_hpt37x PCI Highpoint HPT37x/30x # pata_hpt3x2n PCI Highpoint HPT3x2n/30x # pata_hpt3x3 PCI Highpoint HPT343/363 # pata_it8213 PCI ITE 8213 # pata_it821x PCI IT8211/IT8212 IDE RAID controller # pata_jmicron PCI Jmicron PATA ports # pata_marvell PCI Marvell ATA in legacy mode # pata_mpiix PCI Intel MPIIX # pata_netcell PCI Netcell PATA RAID # pata_ninja32 PCI Ninja32 # pata_ns87410 PCI Nat Semi 87410 # pata_ns87415 PCI NS87415 # pata_oldpiix PCI early PIIX series # pata_optidma PCI Opti Firestar/Firestar Plus # pata_opti PCI Opti 621/621X # pata_pdc2027x PCI Promise PDC20268 to PDC20277 # pata_pdc202xx_old PCI Promise 2024x and 20262-20267 # pata_qdi PCI qdi # pata_radisys PCI Radisys R82600 # pata_rdc PCI RDC # pata_rz1000 PCI RZ1000 # pata_sc1200 PCI NS/AMD SC1200 # pata_sch PCI Intel SCH PATA controllers # pata_serverworks PCI Serverworks OSB4/CSB5/CSB6 # pata_sil680 PCI SI680A # pata_sis PCI SiS # pata_sl82c105 PCI Sl82c105 # pata_triflex PCI Compaq Triflex # pata_via PCI VIA # pata_winbond PCI Winbond VL ATA # pdc_adma PCI Pacific Digital Corporation ADMA # # This is an Industry Standard Flash-Module: # # diskonchip M-Sys DiskOnChip # # Some drivers for CDROM-Drives: # ide-cd IDE-CDROM # usb-cd USB-CDROM (needs opt_usb) # sata-cd SATA-CDROM # ata-cd ATA/IDE-CDROM # pcmcia-cd PCMCIA CD-Rom Drives - needs opt_pcmcia # No boot possible from this devices # scsi-cd SCSI-CDROM, you need to select a SCSI-Driver too! # # For usb-cd and usb-hd you can select some options for special bridge-chips: # ums-karma Rio Karma # ums-freecom Freecom USB/IDE adaptor # ums-onetouch Maxtor USB OneTouch hard drive button driver # ums-alauda Alauda-based card readers # ums-sddr55 SanDisk SDDR-55 SmartMedia reader # ums-sddr09 SanDisk SDDR-09 SmartMedia reader # ums-cypress SAT support for Cypress USB/ATA bridges with ATACB # ums-jumpshot Lexar "Jumpshot" Compact Flash reader # ums-isd200 In-System Design, Inc. ISD200 ASIC # ums-usbat SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable # ums-datafab Datafab USB Compact Flash reader # # SATA-HW-Specific Drivers (all PCI/PCIe) # sata_sis Silicon Integratad Systems SATA controller # sata_via VIA SATA controllers # sata_sil Silicon Image SATA controller # sata_nv NVIDIA nForce SATA controller # sata_uli ULi Electronics SATA controller # sata_promise Promise ATA TX2/TX4/TX4000 # sata_svw K2 SATA controller # sata_mv Marvell SATA controllers # sata_qstor Pacific Digital Corporation QStor SATA # sata_inic162x Initio 162x SATA # sata_vsc Vitesse VSC7174 SATA controller # sata_sx4 Promise SATA # sata_sil24 Silicon Image 3124/3132 SATA # # KVM Specific # virtio KVM Virtual Blockdevice (virtio) # # XEN Specific # xen-hd XEN Block Frontend Driver (only necessary with 'external' kernels) # #------------------------------------------------------------------------------ OPT_HDDRV='no' # install drivers for harddisk: yes or no HDDRV_N='1' # number of HD drivers to load, usually 1 HDDRV_1='ide-hd' # 1st driver: name (e.g. ide-hd) HDDRV_1_OPTION='' # 1st driver: additional option #------------------------------------------------------------------------------ # Optional package: install on HD or Flashdisk #------------------------------------------------------------------------------ OPT_HDINSTALL='no' # install on harddisk: yes or no #------------------------------------------------------------------------------ # Optional: mount additional devices #------------------------------------------------------------------------------ OPT_MOUNT='no' # mount partitions, created by opt_hdinstall #------------------------------------------------------------------------------ # Optional: mount (extended) devices not created by hdinstall.sh #------------------------------------------------------------------------------ OPT_EXTMOUNT='no' # mount other (extended) partitions EXTMOUNT_N='0' # number of partitions to mount EXTMOUNT_1_VOLUMEID='usbstick' # device, label or uuid; use command "blkid" EXTMOUNT_1_FILESYSTEM='auto' # filesystem (auto,ext2,ext3,fat,vfat,isofs) EXTMOUNT_1_MOUNTPOINT='' # mountpoint for device, if empty, # /media/$label is used EXTMOUNT_1_OPTIONS='' # extra mount options passed via mount -o EXTMOUNT_2_VOLUMEID='hdc1' EXTMOUNT_2_FILESYSTEM='ext3' EXTMOUNT_2_MOUNTPOINT='/mnt/bigvol' EXTMOUNT_2_OPTIONS='' #------------------------------------------------------------------------------ # Optional package: Power-Down for IDE Harddisk #------------------------------------------------------------------------------ OPT_HDSLEEP='no' # power down HD after some time HDSLEEP_TIMEOUT='2' # wait 2 minutes until power down #------------------------------------------------------------------------------ # Optional package: activates tools to copy a normal installation to # a recover version - activated by syslinux-bootmenu #------------------------------------------------------------------------------ OPT_RECOVER='no'