##----------------------------------------------------------------------------- ## isdn.txt - fli4l configuration parameters __FLI4LVER__ ## ## P L E A S E R E A D T H E D O C U M E N T A T I O N , ## S E E R E A D M E . T X T ## ## B I T T E U N B E D I N G T D I E D O K U M E N T A T I O N ## L E S E N , S I E H E R E A D M E . T X T ## ## Creation: 26.06.2001 fm ## Last Update: $Id$ ## ## Copyright (c) 2001-2011 - Frank Meyer, fli4l-Team - team@fli4l.de ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ##----------------------------------------------------------------------------- #------------------------------------------------------------------------------ # Optional package: ISDN #------------------------------------------------------------------------------ OPT_ISDN='no' # use ISDN: yes or no # ISDN Adapter #------------- ISDN_TYPE='3' # type, e.g. 3 for Teles 16.3 ISA ISDN_IO='0xd80' # io, e.g. 0xd80 for Teles 16.3 ISA ISDN_IO0='' # io0 ISDN_IO1='' # io1 ISDN_MEM='' # mem ISDN_IRQ='12' # irq, e.g. 12 for Teles 16.3 ISA ISDN_DEBUG_LEVEL='31' # debug level (hisax driver) ISDN_VERBOSE_LEVEL='2' # verbose level ISDN_FILTER='yes' # use active filter: yes or no #------------------------------------------------------------------------------ # ISDN compression (EXPERIMENTAL): #------------------------------------------------------------------------------ OPT_ISDN_COMP='no' # use LZS or BSD compression: yes or no ISDN_LZS_DEBUG='1' # debug level lzscomp (0..3) ISDN_LZS_COMP='8' # compression level lzscomp (0..9) ISDN_LZS_TWEAK='7' # tweak lzscomp (at present: 0..7) #------------------------------------------------------------------------------ # ISDN Circuits: #------------------------------------------------------------------------------ ISDN_CIRCUITS_N='1' # no. of ISDN circuits, DSL: see pppoe.txt #------------------------------------------------------------------------------ # Circuit 1: Internet-By-Call-Provider MSN #------------------------------------------------------------------------------ ISDN_CIRC_1_NAME='msn' # circuit MSN ISDN_CIRC_1_USEPEERDNS='yes' # use your provider's dns server: yes or no ISDN_CIRC_1_TYPE='ppp' # circuit uses sync ppp (ipppd) ISDN_CIRC_1_BUNDLING='no' # channel bundling: yes or no ISDN_CIRC_1_BANDWIDTH='' # if bundling=yes: opt. bandwidth on demand ISDN_CIRC_1_CLAMP_MSS='no' # clamp tcp mss to pmtu, needed # for ISDN Mediaways based # providers (i.e. compuserve Pro) ISDN_CIRC_1_HEADERCOMP='no' # compress headers: yes or no ISDN_CIRC_1_FRAMECOMP='default' # type of framecompression, see docum. ISDN_CIRC_1_REMOTENAME='' # optional: remote hostname for dialin ISDN_CIRC_1_USER='msn' # user-ID to login into provider's gateway ISDN_CIRC_1_PASS='msn' # password for login ISDN_CIRC_1_ROUTE_N='1' # number of routes for this isdn circuit ISDN_CIRC_1_ROUTE_1='0.0.0.0/0' # this is the default route ISDN_CIRC_1_DIALOUT='0192658' # dialout: ISDN number of provider ISDN_CIRC_1_DIALIN='' # dialin: no dialin ISDN_CIRC_1_CALLBACK='off' # callback: in, out, off or cbcp[0|3|6] ISDN_CIRC_1_CBNUMBER='' # callback number for cbcp[3|6] ISDN_CIRC_1_CBDELAY='3' # callback delay, only used for callbacks ISDN_CIRC_1_EAZ='81330' # your MSN (without area code) ISDN_CIRC_1_SLAVE_EAZ='' # optional slave MSN for channel bundling ISDN_CIRC_1_DEBUG='yes' # enable ipppd debugging: yes or no ISDN_CIRC_1_AUTH='' # require the peer to authenticate itself ISDN_CIRC_1_HUP_TIMEOUT='45' # hangup after 45 seconds idle time ISDN_CIRC_1_CHARGEINT='1' # value of charge interval (in seconds) ISDN_CIRC_1_TIMES='Mo-Su:00-24:0.0148:Y' # times/charges when LCR #------------------------------------------------------------------------------ # Circuit 2: bidirectional connection to another router with raw tcpip # not activated yet, only example for non-default-circuit #------------------------------------------------------------------------------ ISDN_CIRC_2_NAME='Firma' # circuit name, e.g. 'Firma' ISDN_CIRC_2_USEPEERDNS='yes' # not used for raw-ip connection ISDN_CIRC_2_TYPE='raw' # circuit uses raw tcp/ip ISDN_CIRC_2_BUNDLING='no' # channel bundling: yes or no ISDN_CIRC_2_BANDWIDTH='' # if bundling=yes: opt. bandwidth on demand ISDN_CIRC_2_LOCAL='192.168.120.8' # local ip address of this circuit ISDN_CIRC_2_REMOTE='192.168.120.7' # remote ip address of this circuit ISDN_CIRC_2_CLAMP_MSS='no' # clamp tcp mss to pmtu, needed # for ISDN Mediaways based # providers (i.e. compuserve Pro) ISDN_CIRC_2_HEADERCOMP='no' # not used for raw-ip connection ISDN_CIRC_2_FRAMECOMP='default' # not used for raw-ip connection ISDN_CIRC_2_REMOTENAME='' # optional: remote hostname for dialin ISDN_CIRC_2_USER='' # user-id not used for raw connection ISDN_CIRC_2_PASS='' # password not used for raw connection ISDN_CIRC_2_ROUTE_N='1' # number of routes for this isdn circuits ISDN_CIRC_2_ROUTE_1='192.168.1.0/24' # remote net to reach over this circuit ISDN_CIRC_2_DIALOUT='0221xxxxxx' # dialout no. of remote router ISDN_CIRC_2_DIALIN='221xxxxxx' # dialin no. with area code, no leading '0' ISDN_CIRC_2_CALLBACK='off' # callback for raw-ip: in, out or off ISDN_CIRC_2_CBNUMBER='' # not applicable to raw-ip connection ISDN_CIRC_2_CBDELAY='3' # callback delay, only used for callbacks ISDN_CIRC_2_EAZ='81330' # your MSN (without area code) ISDN_CIRC_2_SLAVE_EAZ='' # optional slave MSN for channel bundling ISDN_CIRC_2_DEBUG='no' # not used for raw-ip connection ISDN_CIRC_2_AUTH='' # not used for raw-ip connection ISDN_CIRC_2_HUP_TIMEOUT='45' # hangup after XX seconds idle time ISDN_CIRC_2_CHARGEINT='90' # value of charge interval (in seconds) ISDN_CIRC_2_TIMES='Mo-Fr:09-18:0.08:N Mo-Fr:18-09:0.03:N Sa-Su:00-24:0.03:N' # times/charges when LCR #------------------------------------------------------------------------------ # telmond configuration: #------------------------------------------------------------------------------ OPT_TELMOND='no' # start telmond: yes or no TELMOND_PORT='5001' # port (tcp), don't open in INPUT_ACCEPT_PORT_x TELMOND_LOG='no' # log to telmond.log: yes or no TELMOND_LOGDIR='/var/log' # log-directory, e.g. /var/log TELMOND_MSN_N='0' # number of msn->ip mapping entries TELMOND_MSN_1='123 192.168.6.2' # e.g. map MSN 123 to client 192.168.6.2 TELMOND_CMD_N='0' # no. of commands to be executed if call-in TELMOND_CMD_1='123 * sleep 5; imonc dial' # e.g. dial out via default circuit