##----------------------------------------------------------------------------- ## samba_lpd.txt - fli4l configuration parameters __FLI4LVER__ ## ## P L E A S E R E A D T H E D O C U M E N T A T I O N , ## S E E R E A D M E . T X T ## ## B I T T E U N B E D I N G T D I E D O K U M E N T A T I O N ## L E S E N , S I E H E R E A D M E . T X T ## ## Creation: 26.06.2001 fm ## Last Update: $Id$ ## ## Copyright (c) 2001-2011 - Frank Meyer, fli4l-Team - team@fli4l.de ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ##----------------------------------------------------------------------------- #------------------------------------------------------------------------------ # Optional package: SAMBA # (if you want to print over samba, also OPT_LPD must be set to 'yes') # Attention! Variables added/changed/removed! #------------------------------------------------------------------------------ OPT_SAMBA='no' # install samba: yes or no SAMBA_WORKGROUP='workgroup' # workgroup name of windows-clients SAMBA_TRUSTED_NETS='' # grant access also to nets SAMBA_LOG='no' # log errors in /var/log/log.smb and # /var/log/log.nmb: yes or no SAMBA_LOGDIR='' # log directory for samba SAMBA_LPD_PARPORT_1_NAME='' # printer name in network neighborhood SAMBA_LPD_PARPORT_1_NET='' # allowed networks for LPD_PARPORT_1, # if empty all internal nets SAMBA_LPD_PARPORT_2_NAME='' # printer name in network neighborhood SAMBA_LPD_PARPORT_2_NET='' # allowed networks for LPD_PARPORT_2, # if empty all internal nets SAMBA_LPD_PARPORT_3_NAME='' # printer name in network neighborhood SAMBA_LPD_PARPORT_3_NET='' # allowed networks for LPD_PARPORT_3, # if empty all internal nets SAMBA_LPD_USBPORT_1_NAME='' # printer name in network neighborhood SAMBA_LPD_USBPORT_1_NET='' # allowed networks for LPD_USBPORT_1, # if empty all internal nets SAMBA_LPD_REMOTE_1_NAME='' # printer name in network neighborhood SAMBA_LPD_REMOTE_1_NET='' # allowed networks for LPD_REMOTE_1_IP, # if empty all internal nets SAMBA_LPD_REMOTE_2_NAME='' # printer name in network neighborhood SAMBA_LPD_REMOTE_2_NET='' # allowed networks for LPD_REMOTE_2_IP, # if empty all internal nets SAMBA_LPD_REMOTE_3_NAME='' # printer name in network neighborhood SAMBA_LPD_REMOTE_3_NET='' # allowed networks for LPD_REMOTE_3_IP, # if empty all internal nets SAMBA_LPD_SMBREMOTE_1_NAME='' # printer name in network neighborhood SAMBA_LPD_SMBREMOTE_1_NET='' # allowed networks for LPD_REMOTE_1_IP, # if empty all internal nets SAMBA_LPD_SMBREMOTE_2_NAME='' # printer name in network neighborhood SAMBA_LPD_SMBREMOTE_2_NET='' # allowed networks for LPD_REMOTE_2_IP, # if empty all internal nets SAMBA_LPD_SMBREMOTE_3_NAME='' # printer name in network neighborhood SAMBA_LPD_SMBREMOTE_3_NET='' # allowed networks for LPD_REMOTE_3_IP, # if empty all internal nets #------------------------------------------------------------------------------ # Optional package: SAMBATOOLS #------------------------------------------------------------------------------ OPT_SAMBATOOLS='no' # install samba tools #------------------------------------------------------------------------------ # Optional package: NMBD # Attention! Variables added! #------------------------------------------------------------------------------ OPT_NMBD='no' # install nmbd as SMB Nameserver NMBD_MASTERBROWSER='no' # act as a masterbrowser: yes or no NMBD_DOMAIN_MASTERBROWSER='no' # dangerous, read documentation! NMBD_WINSSERVER='no' # act as an WINS-Server: yes or no NMBD_EXTWINSIP='' # IP address of the external WINS-Server, # act as an WINS-Client #------------------------------------------------------------------------------ # Optional package: LPD # Attention! Variables added/changed/removed! #------------------------------------------------------------------------------ OPT_LPD='no' # install lpd: yes or no #------------------------------------------------------------------------------ # Local parallel ports #------------------------------------------------------------------------------ OPT_LPD_PARPORT='no' # use local parallel ports: yes or no LPD_PARPORT_N='1' # how many parallel ports are used LPD_PARPORT_1_IO='0x378' # io-adress for printer on 1st port LPD_PARPORT_1_IRQ='no' # use interrupt: yes or no LPD_PARPORT_1_DMA='no' # use dma: yes or no # yes needs LPD_PARPORT_1_IRQ='yes' LPD_PARPORT_2_IO='0x278' # io-adress for printer on 2nd port LPD_PARPORT_2_IRQ='no' # use interrupt: yes or no LPD_PARPORT_2_DMA='no' # use dma: yes or no # yes needs LPD_PARPORT_2_IRQ='yes' LPD_PARPORT_3_IO='0x3bc' # io-adress for printer on 3rd port LPD_PARPORT_3_IRQ='no' # use interrupt: yes or no LPD_PARPORT_3_DMA='no' # use dma: yes or no # yes needs LPD_PARPORT_3_IRQ='yes' #------------------------------------------------------------------------------ # Local usb ports #------------------------------------------------------------------------------ OPT_LPD_USBPORT='no' # use local usb ports: yes or no LPD_USBPORT_N='1' # how many local usb ports are used #------------------------------------------------------------------------------ # Special remote printservers - Read Documentation! #------------------------------------------------------------------------------ OPT_LPD_REMOTE='no' # use remote ports: yes or no LPD_REMOTE_N='1' # how many remote printers are used LPD_REMOTE_1_IP='192.168.6.99' # IP of 1st remote printer LPD_REMOTE_1_PORT='' # Port of 1st remote printer LPD_REMOTE_1_QUEUENAME='pr1' # queue name of 1st remote printer LPD_REMOTE_2_IP='192.168.6.99' # IP of 2nd remote printer LPD_REMOTE_2_PORT='' # Port of 2nd remote printer LPD_REMOTE_2_QUEUENAME='pr2' # queue name of 2nd remote printer LPD_REMOTE_3_IP='192.168.6.100' # IP of 3rd remote printer LPD_REMOTE_3_PORT='9100' # Port of 3rd remote printer LPD_REMOTE_3_QUEUENAME='' # queue name of 3rd remote printer #------------------------------------------------------------------------------ # Special remote smb printservers - Read Documentation! #------------------------------------------------------------------------------ OPT_LPD_SMBREMOTE='no' # use remote smb printers: yes or no LPD_SMBREMOTE_DEBUGLEVEL='0' LPD_SMBREMOTE_N='1' # how many remote smb printers are used LPD_SMBREMOTE_1_SERVER='ente' # NETBIOS name of 1st remote smb printer server LPD_SMBREMOTE_1_SERVICE='pr2' # printer share name of 1st remote smb printer LPD_SMBREMOTE_1_USER='king' # user name for 1st remote smb printer LPD_SMBREMOTE_1_PASSWORD='kong' # password for the 1st remote smb printer LPD_SMBREMOTE_1_IP='192.168.0.6' # IP of the 1st remote smb printer #------------------------------------------------------------------------------ # Samba Fileserver #------------------------------------------------------------------------------ #------------------------------------------------------------------------------ # Samba Fileserver # If a folder does not exist, no shares are available! #------------------------------------------------------------------------------ SAMBA_ADMINIP='' # ip addr of smb-client (mount fli4l rootfs) SAMBA_SHARE_N='0' # how many shares you want to create SAMBA_SHARE_1_NAME='files' # name of the 1st share SAMBA_SHARE_1_RW='yes' # should share writeable: yes or no SAMBA_SHARE_1_BROWSE='yes' # should share browseable: yes or no SAMBA_SHARE_1_PATH='/data2' # path of the share, see MOUNT_x_POINT ! SAMBA_SHARE_1_NET='' # allowed networks for 1st share, # if empty all internal nets SAMBA_SHARE_2_NAME='phonbook' # name of the 1st share SAMBA_SHARE_2_RW='yes' # should share writeable: yes or no SAMBA_SHARE_2_BROWSE='yes' # should share browseable: yes or no SAMBA_SHARE_2_PATH='/data/log' # path of the share, see MOUNT_x_POINT ! SAMBA_SHARE_2_NET='' # allowed networks for 1st share, # if empty all internal nets SAMBA_CDROM_N='0' # create shares for n CDROMs SAMBA_CDROM_1_DEV='hdc' # name of the CDROM device eg. hdc SAMBA_CDROM_1_NET='' # allowed networks for 1st CDROM# #------------------------------------------------------------------------------