Changes for package: SAMBA_LPD =============================================================================== $Id$ =============================================================================== 2.0.2: ------ 06.01.2002 tb - rc700.samba: nmbd settings only if OPT_NMBD='yes' 08.01.2002 tb - rc700.samba: corrected error message of OPT_NMBD 2.0.3: ------ 11.02.2002 tb - rc700.samba: corrected checking of OPT_NMBD (from OPT_NMBD to $OPT_NMBD) 2.1.0: ------ 04.03.2002 jw5 - opt/package.txt adjusted to new file format (see base/doc/dev/opt.txt) 04.03.2002 tb - rc700.samba: added client code page and character set for correct üöä.. 04.03.2002 tb - rc700.samba: bugfix for error message "find_domain_master_name_query_fail: Unable to find the Domain Master Browser name WORKGROUP<1b> for the workgroup WORKGROUP. Unable to sync browse lists in this workgroup." in WINS-Mode 14.03.2002 tb - rc700.samba: disable logging with new variable SAMBA_LOG='no' 25.03.2002 tb - rc700.samba: hosts allow for all nets in FORWARD_TRUSTED_NETS, needed for incoming connections over isdn 29.03.2002 tb - rc700.samba: redesign for configuring only, if individual /etc/smb.conf does'nt exist 29.03.2002 hs - renamed startup-files for new startup-concept 01.04.2002 hs - added function call to rc.scripts 01.04.2002 hs - converted variable next_rd to file /var/run/next_rd 05.04.2002 tb - rc455.samba: configuring only for non-dhclient interfaces 21.04.2002 tb - changed indices (SAMBA_SHARE_NAME_x to SAMBA_SHARE_x_NAME and so on) 21.04.2002 tb - rc455.samba: bugfix for error message deleted - problems with vpnd "find_domain_master_name_query_fail: Unable to find the Domain Master Browser name WORKGROUP<1b> for the workgroup WORKGROUP. Unable to sync browse lists in this workgroup." in WINS-Mode 10.05.2002 tb - rc700.samba: changes for starting samba only for non dhcp-client- interfaces (DHCLIENT, DHCPCD) - Binaries smbd and nmbd are new compiled - they are now smaller 02.06.2002 tb - rc700.samba: added encrypt passwords = yes for fixing problems with Windows NT on subnets on fli4l 04.06.2002 tb - rc700.samba: removed encrypt passwords = yes Problems with /etc/smbpasswd 30.06.2002 tb - added printernames for network neighborhood in /config/samba_lpd.txt - added /check/samba_lpd.exp with regexpressions for sharenames and printernames 16.08.2002 tb - added dfree command for correcting bug, that samba only shows 3,96 GB on big HDDs (depending on client os and service pack there come back different HDD sizes, this is a problem of the clients!) 04.09.2002 tb - configuring automatically as wins proxy if samba act as an wins client or wins server (removed option NMBD_WINSPROXY from /config/samba_lpd.txt) - removed SAMBA_TIMESERVER, now always set to 'yes' - added code for 'remote announce' 'remote browse sync' no configuration options yet 07.09.2002 tb - removed functions start_samba, start_lpd 13.09.2002 tb - changed regexp for check 24.09.2002 tb - rc445.samba: added encrypt passwords = yes for fixing problems with Windows NT on subnets of fli4l Problems with /etc/smbpasswd solved with empty /etc/smbpasswd Thanks for tips and testing from Gebhard Höscheler and Thomas Busch 2.1.1: ------ 11.10.2002 tb - new smbd and nmbd for Kernel 2.4.20 28.11.2002 tb - rc445.lpd: added support for spool directory on minix hdd filesystem 2.1.2: ------ 30.12.2002 tb - new modules for 2.1.2 14.01.2003 - new lpd, lprm, lpr, lpq for 2.4.20 uclibc - rc445.lpd: added support for spool directory on minix ramdisk filesystem 22.01.2003 - removed NMBD_WINSCLIENT 02.02.2003 - only write share for root filesystem if SAMBA_ADMINIP is not empty 08.02.2003 - using function do_insmod_if_exists 09.02.2003 - changed writing of /etc/hosts.lpd for new format in base.txt 12.02.2003 - new binaries - added /etc/rc0.d/rc400.samba for shutdown - removed /opt/files/usr/lib/libdb.so.1 26.05.2003 od - replaced lpd by new one - now remote printing via lpd protocol is possible again 2.1.3: ------ 18.04.2003 - changed socket options from TCP_NODELAY to TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=8192 SO_SNDBUF=8192 21.04.2002 - added sambatools and some helper files (modules, scripts) nmblookup smbclient smbmnt smbmount smbstatus smbumount smbfs.o nls_iso8859-1.o nls_cp850.o samba-dismount-smbfs samba-mount-smbfs samba-netsend stty 20.05.2002 - added SAMBA_TRUSTED_NETS 26.05.2003 od - replaced lpd by new one - now remote printing via lpd protocol is possible again 29.06.2003 tb - changed "mangle case" from 'yes' to 'no' - solved problems with non DOS conformal file names 24.07.2003 tb - accept other ports then 0x3bc, 0x378, 0x278 for lpd 15.08.2003 tb - linking /var/log/log.nmb and /var/log/log.smb to /dev/null _before_ daemons are starting, if SAMBA_LOG is 'no', because if linking afterwards, logging is going into the ramdisk 2.1.4: ------ 28.09.2003 tb - using /proc/mounts now, because /etc/mtab does't exist anymore 2.1.5: ------ no changes 2.1.6: ------ 24.02.2004 tb - new binaries for samba and lpd, od changed lpd to allow printing from other than normal ports, because cups as client needs this 01.03.2004 tb - removed file server configuration: SAMBA_ADMINIP SAMBA_SHARE_N SAMBA_SHARE_NAME_x SAMBA_SHARE_RW_x SAMBA_SHARE_BROWSE_x SAMBA_SHARE_PATH_x SAMBA_SHARE_NET_x SAMBA_CDROM_N SAMBA_CDROM_DEV_x SAMBA_CDROM_NET_x - added NMBD_DOMAIN_MASTERBROWSER - added support for usb printers: OPT_LPD_USBPORT LPD_USBPORT_N SAMBA_LPD_USBPORT_x_NAME SAMBA_LPD_USBPORT_x_NET - changed LPD_PORT_N LPD_PORT_x to OPT_LPD_PARPORT LPD_PARPORT_N LPD_PARPORT_x - changed SAMBA_LPD_PORT_x_NAME SAMBA_LPD_PORT_x_NET to SAMBA_LPD_PARPORT_x_NAME SAMBA_LPD_PARPORT_x_NET - changed LPD_REMOTE_N LPD_REMOTE_x_IP LPD_REMOTE_x_QUEUENAME to OPT_LPD_REMOTE LPD_REMOTE_N LPD_REMOTE_x_IP LPD_REMOTE_x_QUEUENAME - removed LPD_SPOOLPATH (only spooling to hdd, if writeable minix partition mounted on /data, this is hdsetup typ b) - pci cards with parallel ports (netmos chipset) are documented now - 'dns proxy' is always 'no' now, this is usefull for vpn connections 10.03.2004 tb - printing was impossible, because ram_error was always true (thanks to Hans-Hermann Redenius) - configuring printer if "$ram_error" != true -o "$spooldir_error" != true (was "$ram_error" != true -a "$spooldir_error" != true and thats why printing was not ok without data partition) 07.04.2004 tb - check for printing vars corrected (thanks to Jean Wolter) failure was: var_n depends on different opt_var Variable: 'SAMBA_LPD_PARPORT_%_NAME' -> 'OPT_LPD' Var_n: 'LPD_PARPORT_N' -> 'OPT_LPD_PARPORT' [...] 29.04.2004 tb - added 'mx#0' in /etc/printcap for bigger files (thanks to Gerd Walter) 2.1.7: ------ 10.05.2004 tb - removed LPD_RAM, spooling into rootfs ramdisk, if no writeable minix partition mounted on /data found 2.1.8: ------ 29.08.2004 tb - added remote smb printers 03.09.2004 tb - allowing minix, ext2 and ext3 for data partition 13.09.2004 tb - changed LPD_PARPORT_x to LPD_PARPORT_x_IO - allowing irq and dma mode (dma needs new kernel and modules) added LPD_PARPORT_x_IRQ LPD_PARPORT_x_DMA 17.09.2004 tb - setting wins_support="no" and wins_proxy="no" if OPT_NMBD=no (Jean Wolter) - some cleanups and corrected ip using in netsend (Jean Wolter) 23.09.2004 tb - solved undeleteable readonly files with XP SP2 (Achim Kalwa) 'delete readonly = yes' in global part of smb.conf - removed LPD_PARPORT_x_DMA (not useable without new modules) 29.09.2004 tb - check/samba_lpd.ext: corrected foreach i in lpd_parport_% to foreach i in lpd_parport_%_io (Jean Wolter) 2.1.9: ------ 23.12.2004 tb - setting message command to rm %s & (deleting the message) 03.01.2005 tb - added dma again, modules are build with dma support 23.01.2005 tb - removed binaries and modules, which are also in other opts - using provides and depends - only working on /opt/files/bin/smbprint in prep, if it exists - added check for irq if dma is set 2.1.10: ------- 30.05.2005 jw5 - use ${KERNEL_VERSION} instead of $KERNELVERSION$ in opt/samba_lpd.txt 01.06.2005 babel - update to kernel 2.4.31 12.06.2005 lanspezi - added flags for 2.1.10 to opt/samba_lpd.txt 15.06.2005 tb - removed entry for etc/prep/rc400.samba from opt/samba_lpd.txt 23.06.2005 jw5 - removed prep script etc/prep/rc400.lpd and add group entry in rc.d-script 24.06.2005 tb - fixed trim command (thanks to Jean) 26.06.2005 lanspezi - removed empty prep dir 30.06.2005 tb - added "printer 515/tcp" to /etc/services lpd wanted not to start without 30.06.2005 tb - rights corrected 09.07.2005 tb - new var SAMBA_LOGDIR 10.07.2005 tb - correction for logger path, lpd syslog messages (option '-l') and /var/spool/lpd right 14.07.2005 od - patched printjob.c and recvjob.c from lpd remote printing without samba is possible again 14.07.2005 tb - added lpc, edit opt/samba_lpd.txt to copy it with lpd enter 'lpc help' for commands 29.07.2005 tb - check for usb printer driver corrected (Christian Kloimuellner) 2.1.11: ------- 22.07.2005 od - new lpr-0.72 (old version was 0.48) with additional syslog messages 22.07.2005 tb - added printing to remote ports 23.07.2005 tb - fixed typo in config/samba_lpd.txt 29.07.2005 tb - check for usb printer driver corrected (Christian Kloimuellner) 2.1.12: ------- 12.09.2005 tb - removed unnecessarily tr commands 07.10.2005 tb - only configuring interface for OPT_PPP, if the interface is up (Hans-Hermann Redenius) 2.1.13: ------- 29.11.2005 tb - german netsend messages, from hostname 2.1.14: ------- 3.0.0: ------ 3.0.1: ------ 3.1.0: ------ 3.1.1: ------ 3.1.2: ------ 30.12.2006 tb - creating SAMBA_LOGDIR if not existing 31.12.2006 tb - correctly recognizing log base parameters (don't including '-l' in quotes) 07.01.2007 tb - remove old log files on hdd before linking log files to /dev/null, if logging is disabled 3.1.3: ------ 3.1.4: ------ 3.3.0: ------ 3.3.1: ------ 3.3.2: ------ 3.4.1: ------ 08.05.2009 babel - add samba 3.3.4 binaries 16.05.2009 bastard - re-integrate filesharing functionality 3.5.0: ------ 22.12.2009 babel - fix missing libraries 14.03.2010 babel - update to samba 3.5.1 - remove samba mount/dismount support. We use CIFS for this now. 3.6.0: ------ 2011-04-29 - release of stable version 3.6.1: ------ 3.7.0: ------ 2012-03-12 kristov - moving ahead to new uClibc/fli4l buildroot! - printing tools updated to lprng 3.8.35; scripts updated accordingly 2012-05-31 kristov - variables renamed: SAMBA_LPD_PARPORT_%_NAME --> LPD_PARPORT_%_SAMBA_NAME SAMBA_LPD_PARPORT_%_NET --> LPD_PARPORT_%_SAMBA_NET SAMBA_LPD_USBPORT_%_NAME --> LPD_USBPORT_%_SAMBA_NAME SAMBA_LPD_USBPORT_%_NET --> LPD_USBPORT_%_SAMBA_NET SAMBA_LPD_REMOTE_%_NAME --> LPD_REMOTE_%_SAMBA_NAME SAMBA_LPD_REMOTE_%_NET --> LPD_REMOTE_%_SAMBA_NET SAMBA_LPD_SMBREMOTE_%_NAME --> LPD_SMBREMOTE_%_SAMBA_NAME SAMBA_LPD_SMBREMOTE_%_NET --> LPD_SMBREMOTE_%_SAMBA_NET 3.9.0: ------ - samba updated to 3.6.9 3.10.1: ------- FFL-532: USB-Drucker mit Samba/LPR FFL-592: SAMBA_LOGDIR wird nicht respektiert und ein Fehler wird geloggt wenn OPT_LPD nicht aktiv FFL-639: samba_lpt nutzt noch "route" welches nicht mehr existiert FFL-670: Einbindung von mount.cifs FFL-1059: Samba-Logs ermöglichen FFL-1064: Samba-Netzwerkkonfiguration überarbeiten 3.10.2: ------- FFL-1205: Samba File Server ist sehr langsam/unperformant 3.10.3: ------- (keine Änderungen) 3.10.4: ------- (keine Änderungen) 3.10.5: ------- (keine Änderungen) 3.10.6: ------- (keine Änderungen) 3.10.7: ------- (keine Änderungen) 3.10.8: ------- (keine Änderungen) 3.10.9: ------- (keine Änderungen) 3.10.10: -------- (keine Änderungen) 3.10.11: -------- (keine Änderungen) 3.10.12: -------- (keine Änderungen) 3.10.13: -------- (keine Änderungen) 3.10.14: -------- (keine Änderungen) 3.10.15: -------- (keine Änderungen) 3.10.16: -------- (keine Änderungen) 3.10.17: -------- (keine Änderungen) 3.10.18: -------- (keine Änderungen) 3.10.19: -------- (keine Änderungen)