##----------------------------------------------------------------------------- ## base.txt - fli4l configuration parameters __FLI4LVER__ ## ## You can edit/change this file with any text editor. ## ## P L E A S E R E A D T H E D O C U M E N T A T I O N , ## S E E R E A D M E . T X T ## ## B I T T E U N B E D I N G T D I E D O K U M E N T A T I O N ## L E S E N , S I E H E R E A D M E . T X T ## ## Creation: 26.06.2001 fm ## Last Update: $Id$ ## ## Copyright (c) 2001-2002 Frank Meyer ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ##----------------------------------------------------------------------------- #------------------------------------------------------------------------------ # General settings: #------------------------------------------------------------------------------ HOSTNAME='fli4l' # name of fli4l router PASSWORD='fli4l' # password for telnetd, ftpd and sshd FDD_1680='no' # use 1680KB-Floppy MOUNT_BOOT='rw' # mount boot device (floppy): ro, rw, no TIME_INFO='MEZ-1MESZ,M3.5.0,M10.5.0' # description of local time # zone, don't touch without reading # documentation IP_CONNTRACK_MAX='' # override maximum limit of connection # tracking entries #------------------------------------------------------------------------------ # Serial console: #------------------------------------------------------------------------------ SER_CONSOLE='no' # use serial interface instead of crt/keyboard SER_CONSOLE_IF='0' # serial interface to use, 0 for ttyS0 (COM1) SER_CONSOLE_RATE='9600' # Baudrate for serial console #------------------------------------------------------------------------------ # Debug Settings: #------------------------------------------------------------------------------ DEBUG_STARTUP='no' # Write an execution trace of the boot DEBUG_LOG='' # sequence to file DEBUG_LOG or console if # DEBUG_LOG is empty #------------------------------------------------------------------------------ # Show Bootmenu after Login: #------------------------------------------------------------------------------ OPT_MENU='yes' # Start-menue for users MENU_LANGUAGE='de' # Default-Language of the Start-Menu #------------------------------------------------------------------------------ # Ethernet card drivers: # # Driver Bus Description # # 3c503 ISA 3COM EtherLinkII (3c503) # 3c505 ISA 3COM Etherlink Plus (3c505) # 3c507 ISA 3COM Etherlink 16 (3c507) # 3c509 ISA 3COM EtherLinkIII (3c509) # 3c515 ISA 3COM EtherLink XL ISA (3c515) # 3c59x PCI 3COM Vortex/Boomerang 3c59x,3c900,3c905 # 8139cp PCI RealTek 8139C+ # 8139too PCI RealTek 8129/8139 10/100 MB (NEW) # rtl8139 PCI RealTek 8129/8139, Donald Beckers Version, see # http://www.scyld.com/network/rtl8139.html # 82596 Apricot Xen-II on board Ethernet # acenic PCI Alteon AceNIC Gigabit Ethernet # at1700 ISA AT1700 (Fujitsu 86965) ISA # b44 PCI Broadcom 4400 # cs89x0 ISA IBM Etherjet, cs89x0 based Cards (Option io=0xnnn necessary!) # de4x5 PCI/EISA Digital DE425, DE434, DE435, DE450, DE500 # depca ISA DEPCA, DE10x, DE200, DE201, DE202, DE422 # dgrs PCI Digi International RightSwitch PCI/EISA # dl2k PCI D-Link DL2000-based Gigabit Ethernet Adapter # dmfe PCI DM9102 compatible PCI cards from Davicom # e1000 PCI Intel EtherExpress PRO/1000 Gigabit Ethernet # e100 PCI Intel's original driver for EEPRO100 # e2100 ISA Cabletron E21xx ISA # eepro100 PCI Intel EtherExpressPro PCI 10+/100B/100+ # eepro ISA Intel EtherExpress Pro/10 # eexpress ISA EtherExpress16 ISA # epic100 PCI SMC EPIC/100 (EtherPower II) PCI # eth16i ISA/EISA ICL EtherTeam 16i/32 # ewrk3 ISA EtherWORKS 3 ISA (DE203, DE204, DE205) # fealnx PCI ASOUND LAN 8139 card - not RTL8139 (NEW) # hamachi PCI GNIC-II Gigabit Ethernet # hp100 ISA/EISA/PCI HP 10/100VG PCLAN (ISA, EISA, PCI) # hp ISA HP PCLAN (27245, 27xxx) ISA # hp-plus ISA HP PCLAN+ (27247B and 27252A) ISA # lance ISA AMD LANCE and PCnet (AT1500, NE2100) ISA # lp486e Intel Professional Workstation/panther ethernet driver # natsemi PCI National Semiconductor # ne2k-pci PCI NE2000 PCI clone (eg. Realtek 8029, Winbond 89c940) # ne ISA NE2000 ISA clone (eg. Realtek 8019, # Accton 16xx, NatSemi 8390, UMC 9003/9008) # ni5010 MiCom-Interlan NI5010 # ni52 NI5210 card (i82586 Ethernet chip) # ni65 ni6510 (am7990 'lance' chip) # ns83820 PCI cards with National Semiconductor 83820 chip # pcnet32 PCI AMD PCI PCnet32 # r8169 PCI Realtek 8169 Gigabit Ethernet # sis900 PCI SiS 900/7016 # sk98lin PCI SysKonnect Gigabit Ethernet Server Adapters # smc9194 SMC's 9000 series of Ethernet cards # smc-ultra ISA SMC ULTRA # starfire PCI Starfire # sundance PCI DFE-550FX or DFE-530TXS (NEW) # tg3 PCI Broadcom Tigon3 # tlan PCI TI ThunderLAN (Compaq Netelligent ...) # tulip PCI DECchip Tulip (dc21x4x) PCI # tulip-db PCI DECchip Tulip (dc21x4x) PCI and work-alike chips from # Lite-On (PNIC) and Macronix (MXIC) and ASIX, # see http://www.scyld.com/network/tulip.html # via-rhine PCI VIA Rhine PCI (3043, VT86c100A, dfe-530tx) # wd ISA SMC WD80*3 # winbond-840 PCI Winbond 840 # yellowfin PCI Packet Engines G-NIC PCI Gigabit Eth Adapter # # Drivers below need the Package pcmcia installed: # # 3c574_cs PCMCIA 3Com 574 # 3c589_cs PCMCIA 3Com 589 # axnet_cs PCMCIA Asix AX88190 Fast Ethernet # fmvj18x_cs PCMCIA Fujitsu FMV-J181/182 Ethernet # nmclan_cs PCMCIA New Media Ethernet LAN # pcnet_cs PCMCIA NS8390-based cards (NE2000, DLINK etc) # smc91c92_cs PCMCIA SMC91c92-based cards # xirc2ps_cs PCMCIA Xircom: CE2, CEM28, CEM33, or CE3 # xircom_cb Cardbus Xircom Cardbus Cards # xircom_tulip_cb Cardbus Xircom Tulip-like Cardbus Cards # # If you don't find your Cardbus Card here then try the equivalent PCI-Driver: # 3c59x instead of 3c575_cb or 8139too instead of realtek_cb # # This drivers need PCMCIA _and_ WLAN: # # orinoco_cs PCMCIA Lucent/Orinoco WLAN-Cards # hostap_cs PCMCIA PrismII/2.5/3 based Cards - supports AP-Mode # wavelan_cs PCMCIA WaveLAN # wl24_cs PCMCIA ELSA Airlancer MC-2 - Should have Firmware 2.10 # airo_cs PCMCIA Cisco Aironet 4500 & 4800 series PCMCIA cards # ray_cs PCMCIA Raylink wireless cards # netwave_cs PCMCIA Netwave AirSurfer Wireless LAN # # this drivers need Package WLAN # # WLAN-Card Drivers IEEE802.11b: # # hostap_pci PCI Prism 2.5 based PCI Wlan Cards # hostap_plx PCI Prism 2,2.5 and 3 based PCMCIA-WLan Cards in PLX-Adapter # airo PCI/ISA Cisco Aironet 4500 & 4800 series PCI/ISA cards # # This 3 drivers acutally only work with Prism-II Cards - alternative driver to hostap_* # orinoco_pci PCI Lucent/Orinoco based WLAN-Cards # orinoco_plx PCI Lucent/Orinoco based PCMCIA WLAN-Cards in PLX Adapter # orinoco_tmd PCI Lucent/Orinoco based WLAN-Cards with TMD PCI-Bridge # WLAN-Card Drivers IEEE802.11g: # # prism54 PCI/PCMCIA Prism GT / Prism Duette / Prism Indigo Chipsets # Achten Sie auf die Hinweise zum Prism54 Treiber # in der WLAN Dokumentation! # # USB-Card Drivers # # pegasus teledat Fast Ethernet USB # # kaweth 3Com 3C19250 # ADS USB-10BT # ATEN USB Ethernet # ASANTE USB To Ethernet Adapter # AOX Endpoints USB Ethernet # Correga K.K. # D-Link DSB-650C and DU-E10 # Entrega / Portgear E45 # I-O DATA USB-ET/T # Jaton USB Ethernet Device Adapter # Kingston Technology USB Ethernet Adapter # Linksys USB10T # Mobility USB-Ethernet Adapter # NetGear EA-101 # Peracom Enet and Enet2 # Portsmith Express Ethernet Adapter # Shark Pocket Adapter # SMC 2202USB # Sony Vaio port extender # rtl8150 RTL8150-based USB-Ethernet-Cards # catc Belkin F5U111 # CATC NetMate # CATC NetMate II # smartBridges smartNIC # # DSL-Modems shown as Ethernetcards # # CDCEther Ericsson PipeRider (all variants) # Motorola (DM100 and SB4100) # Broadcom Cable Modem (reference design) # Toshiba PCX1100U and possibly other cable modems # Sharp Zaurus SL-5000D # atar215 Allied Telesyn AT-AR 215 # Sagem 250 # # USB-to-USB-network-cable # # usbnet Driver for usb-to-usb networklinks # # Token ring drivers (see token ring minit howto on # and feel # free to submit documention changes # # 3c359 # abyss # ibmtr # lanstreamer # olympic # smctr # tmsisa # tmspci # # If you need dummy device simply use dummy as you ETH_DRV # and IP_ETH_%_NAME='dummy' as your device # #------------------------------------------------------------------------------ ETH_DRV_N='1' # number of ethernet drivers to load, usually 1 ETH_DRV_1='ne2k-pci' # 1st driver: name (e.g. NE2000 PCI clone) ETH_DRV_1_OPTION='' # 1st driver: additional option ETH_DRV_2='ne' # 2nd driver: name (e.g. NE2000 ISA clone) ETH_DRV_2_OPTION='io=0x320 probe_pci=0' #------------------------------------------------------------------------------ # Ether networks used with IP protocol: #------------------------------------------------------------------------------ IP_ETH_N='1' # number of ip ethernet networks, usually 1 IP_ETH_1_NAME='' # optional: other device name than ethX IP_ETH_1_IPADDR='192.168.6.1' # IP address of your n'th ethernet card IP_ETH_1_NETMASK='255.255.255.0' # netmask of your LAN #------------------------------------------------------------------------------ # Additional routes, optional #------------------------------------------------------------------------------ IP_DEFAULT_GATEWAY='' # normally not used, read documentation! IP_ROUTE_N='0' # number of additional routes IP_ROUTE_1='192.168.7.0 255.255.255.0 192.168.6.99' # network netmask gateway #------------------------------------------------------------------------------ # old or new style paket filter configuration #------------------------------------------------------------------------------ ORIG_FW_CONFIG='yes' #------------------------------------------------------------------------------ # Masquerading: #------------------------------------------------------------------------------ MASQ_NETWORK='192.168.6.0/24' # networks to masquerade (e.g. our LAN) MASQ_MODULE_N='1' # load n masq modules (default: only ftp) MASQ_MODULE_1='ftp' # ftp MASQ_MODULE_1_OPTION='' # options, see documentation MASQ_MODULE_2='irc' # irc MASQ_MODULE_2_OPTION='' # options, see documentation #------------------------------------------------------------------------------ # Optional package: PORTFW #------------------------------------------------------------------------------ OPT_PORTFW='no' # install port forwarding tools/modules PORTFW_N='1' # how many portforwardings to set up PORTFW_1_SOURCE='8080' # sample 1: forward ext. port 8080 PORTFW_1_TARGET='192.168.6.15:80' # ...to int. host 192.168.6.15 port 80 PORTFW_1_PROTOCOL='tcp' # ...using tcp PORTFW_2_SOURCE='3000-3010' # sample 2: forward portrange 3000-3010 PORTFW_2_TARGET='192.168.6.15' # ...to int. host 192.168.6.15 PORTFW_2_PROTOCOL='tcp' # ...using tcp #------------------------------------------------------------------------------ # Routing without masquerading #------------------------------------------------------------------------------ ROUTE_NETWORK='' # optional: route from/to network, no masq #------------------------------------------------------------------------------ # Routing: internal hosts to allow/deny forwarding # # FORWARD_HOST_WHITE='no' describes a black list (forbidden) # FORWARD_HOST_WHITE='yes' describes a white list (allowed) # # Example: # FORWARD_HOST_WHITE='no' and FORWARD_HOST_N='0': # -> forwarding of 0 hosts is denied # -> forwarding of all hosts is allowed. #------------------------------------------------------------------------------ FORWARD_HOST_WHITE='no' # 'no': black list, 'yes': white list FORWARD_HOST_N='0' # number of allowed/denied hosts FORWARD_HOST_1='192.168.6.5' # optional: 1st allowed/denied host FORWARD_HOST_2='192.168.6.6' # optional: 2nd allowed/denied host #------------------------------------------------------------------------------ # Routing: ports to reject/deny forwarding (from inside and outside!) #------------------------------------------------------------------------------ FORWARD_DENY_PORT_N='2' # no. of ports to reject/deny forwarding FORWARD_DENY_PORT_1='135:139 reject' # drop/reject forwarding of netbios FORWARD_DENY_PORT_2='445 reject' # drop/reject forwarding of MS-DS TRUSTED_NETS='' # but optionally allow forwarding between LANs #------------------------------------------------------------------------------ # Filter: accept connections from outside to several ports (served ports) #------------------------------------------------------------------------------ INPUT_POLICY='REJECT' # policy for input chain: reject or drop INPUT_ACCEPT_PORT_N='0' # no. of ports to accept from outside INPUT_ACCEPT_PORT_1='22 TCP' # e.g. allow connection to ssh service DENY_ICMP='no' # deny icmp (ping): yes or no PACKETFILTER_LOG='no' # log access to rejected/denied ports #------------------------------------------------------------------------------ # Domain configuration: #------------------------------------------------------------------------------ START_DNS='yes' # start dns server: 'yes' (use dnsmasq), # 'ens' (use ens) or 'no' DNS_LISTENIP_N='0' # if 0 then listen on all interfaces DNS_LISTENIP_1='192.168.6.1' # first IP to listen on # These two parameters are only relevant, # when START_DNS='yes'. DNS_FORWARDERS='192.76.144.66' # DNS servers of your provider, e.g. MSN DNS_VERBOSE='no' # log queries into syslog DOMAIN_NAME='lan.fli4l' # your domain name DNS_FORBIDDEN_N='0' # number of forbidden domains DNS_FORBIDDEN_1='foo.bar' # 1st forbidden domain DNS_FORBIDDEN_2='bar.foo' # 2nd forbidden domain DNS_REDIRECT_N='0' # number of redirected domains DNS_REDIRECT_1='foo.bar.foo' # 1st redirected domain DNS_REDIRECT_1_IP='192.168.6.100' # ip of redirected domain HOSTS_N='4' # number of hosts in your domain HOST_1_NAME='fli4l' # 1st host: ip and name HOST_1_IP='192.168.6.1' #HOST_1_ALIAS_N='0' # number of optional alias names #HOST_1_ALIAS_1='router.lan.fli4l' # optional alias name #HOST_1_ALIAS_2='gateway.lan.fli4l' # optional alias name HOST_2_NAME='client2' # 2st host: ip and name HOST_2_IP='192.168.6.2' #HOST_2_MAC='de:ad:af:fe:07:19' # optional mac address used by dhcpd HOST_3_NAME='client3' # 3st host: ip and name HOST_3_IP='192.168.6.3' #HOST_3_MAC='de:ad:be:ef:07:19' # optional mac address used by dhcpd HOST_4_NAME='client4' # 4st host: ip and name HOST_4_IP='192.168.6.4' #HOST_4_MAC='de:ad:be:ef:08:15' # optional mac address used by dhcpd MX_N='0' # optional number of MX-records # if START_DNS='yes' only one MX supported # for DOMAIN_NAME MX_1_SERVER='mail.example.net' # fqdn of the mx MX_1_DOMAIN='example.net' # domain handled by MX_1_SERVER MX_1_PRIORITY='10' # priority of the mx, lower means better #------------------------------------------------------------------------------ # Special DNS configuration #------------------------------------------------------------------------------ DNS_N='0' # number of special dns servers, normally 0 #DNS_1='firma.de 192.168.1.12' # 1st special dns server for firma.de #DNS_2='lan.firma.de 192.168.2.12' # 2nd special dns server for lan.firma.de #------------------------------------------------------------------------------ # imond configuration: #------------------------------------------------------------------------------ START_IMOND='no' # start imond: yes or no IMOND_USE_ORIG='yes' # use the original version of # imond instead the development version IMOND_PORT='5000' # TCP-Port dont open in INPUT_ACCEPT_PORT_x IMOND_PASS='' # imond-password, may be empty IMOND_ADMIN_PASS='' # imond-admin-password, may be empty IMOND_LED='' # tty for led: com1 - com4 or empty IMOND_BEEP='no' # beep if connection going up/down IMOND_LOG='no' # log /var/log/imond.log: yes or no IMOND_LOGDIR='/var/log' # log-directory, e.g. /var/log IMOND_ENABLE='yes' # accept "enable/disable" commands IMOND_DIAL='yes' # accept "dial/hangup" commands IMOND_ROUTE='yes' # accept "route" command IMOND_REBOOT='yes' # accept "reboot" command #------------------------------------------------------------------------------ # Generic circuit configuration: #------------------------------------------------------------------------------ IP_DYN_ADDR='yes' # use dyn. ip addresses (most providers do) DIALMODE='auto' # standard dialmode: auto, manual, or off #------------------------------------------------------------------------------ # optional package: syslogd #------------------------------------------------------------------------------ OPT_SYSLOGD='no' # start syslogd: yes or no SYSLOGD_DEST_N='1' # number of destinations SYSLOGD_DEST_1='*.* /dev/console' # n'th prio & destination of syslog msgs SYSLOGD_DEST_2='*.* @192.168.6.2' # example: loghost 192.168.6.2 SYSLOGD_DEST_3='kern.info /var/log/dial.log' # example: log infos #------------------------------------------------------------------------------ # optional package: klogd #------------------------------------------------------------------------------ OPT_KLOGD='no' # start klogd: yes or no #------------------------------------------------------------------------------ # optional package: y2k correction #------------------------------------------------------------------------------ OPT_Y2K='no' # y2k correction: yes or no Y2K_DAYS='' # correct hardware Y2K-Bug: add x days #------------------------------------------------------------------------------ # Optional package: PNP #------------------------------------------------------------------------------ OPT_PNP='no' # install isapnp tools: yes or no #------------------------------------------------------------------------------ # Optional package: inittab #------------------------------------------------------------------------------ OPT_INITTAB='no' INITTAB_N='1' INITTAB_1='tty2 askfirst /usr/local/bin/mini-login'